Головна сторінка бібліотеки Спрощенний режим пошуку Інструкція з пошуку
Авторизація
Прізвище
Пароль
 

Бази даних


Періодичні видання- результати пошуку

Вид пошуку

Зона пошуку
у знайденому
 Знайдено у інших БД:Книжкові видання (31)Повнотекстова база "Навчальні видання" (1)
Формат представлення знайдених документів:
повнийінформаційнийкороткий
Відсортувати знайдені документи за:
авторомназвоюроком виданнятипом документа
Пошуковий запит: (<.>K=AIRCRAFT$<.>)
Загальна кількість знайдених документів : 64
Показані документи с 1 по 20
 1-20    21-40   41-60   61-64 
1.


   
    Телеметрия кодом Морзе [Текст] / материал подгот. А. Долгий // Радио. - 2007. - № 2 ; Радио - о связи. - 2007. - № 2. - С. . 71-73. - Библиогр.: с. 74 (3 назв. ). - (Радио - о связи.- 2007.- N 2.- С. 71-73) .- Ил.: 6 рис., 1 табл.
УДК
ББК 32.88

Рубрики: Радиоэлектроника--Электрическая связь

Кл.слова (ненормовані):
азбука Морзе -- атмосферное давление -- давление атмосферное -- датчики атмосферного давления -- датчики температуры -- код Морзе -- микроконтроллеры -- модули управления -- Морзе азбука -- Морзе код -- передатчики телеметрические -- печатные платы -- платы печатные -- принципиальные схемы -- радиомаяки -- схемы принципиальные -- телеграфная азбука -- телеметрические передатчики -- телеметрия
Анотація: У некоторых радиолюбительских искусственных спутников Земли, у запускаемых с помощью воздушных шаров ретрансляторов и у моделей ракет и самолетов часто используется телеметрия, которая передается с помощью телеграфной азбуки. Это позволяет вести оперативный слуховой контроль параметров системы, не прибегая к помощи декодирующих устройств. Американский радиолюбитель Джерри Баумайстер разработал модули телеметрического передатчика и управление им, предназначенные в первую очередь для небольших ракет (Jerry Baumeister. Morse Code Telemetry for Small Rockets and Aircraft.- QST, 2006, February, p. 29-31) . Но они подойдут и во многих других случаях, когда требуется передача результатов измерений на небольшое расстояние. Первый модуль управления измеряет высоту полета с помощью датчика абсолютного атмосферного давления и температуру с помощью терморезистора, второй модуль не содержит никаких датчиков и работает только как радиомаяк.
Дод.точки доступу:
Долгий, А. \.\
Баумайстер \д.\
Baumeister \j.\

Примірників усього: 1
чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі

2.
Шифр: М29/1986/1
   Журнал

Механика композитных материалов [Текст] : науч.-теорет.журн./ Латвийская акад. наук. - Рига : Латвийский ун-т, 1965 - . - ISSN 0203-1272. - Виходит раз на два місяця
1986р. N 1
Зміст:
Deev, I. S. Microstructure of epoxy matrices / I. S. Deev, L. P. Kobets. - С.1-7. - Bibliography is at the end of the article
Кл.слова: INTERLAYER SHEAR, EPOXY POLYMERS, CARBON FIBERS
Khanarin, V. S. Viscoelastic and acoustic properties of partially crystalline polymers on hydrostatic compression / V. S. Khanarin, A. Ya. Gol'dman, I. V. Sysoev. - С.7-11. - Bibliography is at the end of the article
Кл.слова: ULTRASOUND DILATOMETER, LINEAR HING POLYMER, PHYSICAL PROPERTIES
Dzenis, Yu. A. Effect of aggregation of a dispersed rigid filler on the elastic characteristics of a polymer composite / Yu. A. Dzenis. - С.12-19. - Bibliography is at the end of the article
Кл.слова: ADDITIONAL PARAMETER, SATISFACTORY AGREEMENT, POLYMER COMPOSITES
Skvortsova, N. V. Experimental study of the effect of heating rate and environment on the young's modulus of carbon-fiber plastics in a broad temperature range / N. V. Skvortsova. - С.19-22. - Bibliography is at the end of the article
Кл.слова: CARBON-METAL-PLASTICS, THERMAL DEFORMATIONS, PHYSICOMECHANICAL PROPERTIES
Nikitin, L. V. Damping by dry friction of dynamic loads in a fiber-reinforced composite / L. V. Nikitin, A. N. Tyurekhodzhaev. - С.23-31. - Bibliography is at the end of the article
Кл.слова: NONLINEAR PROBLEMS, QUASISTATIC EFFECT, OSCILLATORY MOTIONS
Ermolenko, A. F. Scale effect of strength in tensile loading unidirectional reinforcing elements / A. F. Ermolenko. - С.31-36. - Bibliography is at the end of the article
Кл.слова: FIBER STRENGTH, SINGLE ARAMID FILAMENTS, CARBON FIBERS
Keiru, D. G. Analysis of failure of a granular composite in the conditions of an adverse medium / D. G. Keiru, Yu. V. Osetinskii, A. N. Podval'nyi. - С.36-40. - Bibliography is at the end of the article
Кл.слова: INHERENT STRESSES, PHENOMENOLOGICAL ASPECT, CONGLOMERATE BODY
Sipetov, V. S. Thermoelasticity of layered composite shells / V. S. Sipetov. - С.41-45. - Bibliography is at the end of the article
Кл.слова: ANISOTROPIC PLATES, PIECEWISE-UNIFORM MEDIA, FINITE ELEMENTS METHOD
Ivanov, O. N. Stability of three-layered cylindrical shells under external pressure on the basis of a three-dimensional formulation / O. N. Ivanov, L. A. Troshina. - С.46-49. - Bibliography is at the end of the article
Кл.слова: ANISOTROPIC CYLINDRICAL SHELLS, AXIAL COMPRESSION, LOW-STIFFNESS FILLER
Popov, K. G. Limiting equilibrium of an infinite plate formed from a crack-weakened hereditary material / K. G. Popov, K. V. Khadzhov. - С.49-53. - Bibliography is at the end of the article
Кл.слова: EQUILIBRIUM CRACKS, POLYMER MECHANICS, BRITTLE SOLIDS
Portnov, G. G. Energy capacity of rotating composite designs (review) / G. G. Portnov, Yu. W. Tarnopol'skii. - С.53-64. - Bibliography is at the end of the article
Кл.слова: COMPOSITE FLYWHEELS, FURTHER INDEPENDENT RESEARCH, PULSE ENERGY SOURCES
Belous, A. A. Use of laminated metals in compressed elements / A. A. Belous, I. B. Mishulin. - С.65-72. - Bibliography is at the end of the article
Кл.слова: AIRCRAFT DESING, THREE-DIMENSIONAL SOLUTION, ELASTIC LIMIT
Zaitsev, G. P. Mechanics of failure of the combined spherical container during a sudden formation of a hole in the container / G. P. Zaitsev [et al.]. - С.72-78. - Bibliography is at the end of the article
Інші автори: Cherevatskii S. B., Valiullin A. Kh., Pashkov V. A., Moiseenko É. A., Kopyl N. I.
Кл.слова: COMPOSITE MATERIALS, ORTHOTROPIC SPHERICAL SHELLS, ELASTIC CYLINDERS
Arutyunyan, N. Kh. Phase transitions in elastic and viscoelastic bodies / N. Kh. Arutyunyan, A. D. Drozdov. - С.79-86. - Bibliography is at the end of the article
Кл.слова: THEORY OF LOCAL FUSION, SOLIDIFICATION OF MATERIALS, PHASE TRANSITIONS
Afanas'ev, Yu. A. Optimization problems in the control of technological processes of heat treatment of products made of composite materials / Yu. A. Afanas'ev, V. I. Murav'ev. - С.86-98. - Bibliography is at the end of the article
Кл.слова: COMPOSITE MATERIALS, OPTIMUM CONTROL, EXTREMAL TEMPERATURE FIELDS
Korotkov, V. N. Production stresses during the solidification of cylindrical articles formed from polymer composite materials / V. N. Korotkov [et al.]. - С.99-103. - Bibliography is at the end of the article
Інші автори: Turusov R. A. , Dzhavadyan É. A., Rozenberg B. A.
Кл.слова: COMPOSITION MATERIALS, THICK-WALLED ARTICLES, EPOXY RESINS
Morozova, E. M. Adhesive compositions based on monomers of the acrylic series for articles made of plasticized polyvinyl chloride and investigation of their polymerization kinetics / E. M. Morozova [et al.]. - С.103-107. - Bibliography is at the end of the article
Інші автори: Ergunova E. L., Morozov A. S., Benderovich T. S.
Кл.слова: COMPOSITE POLYMERS, TEXTILE MATERIALS, AMINOALKYLMETHACRYLATES
Khachatryan, P. M. Dynamic properties of polymeric composites in wide temperature-frequency ranges / P. M. Khachatryan [et al.]. - С.108-111. - Bibliography is at the end of the article
Інші автори: Slobodnik É. B., Zelenev Yu. V., Aivazov A. B.
Кл.слова: POLYMERIC COMPOSITES, IMPACT VISCOSITY OF PLASTICS, RELAXATION EVENTS
Tatarinov, A. M. Alteration of the state of the human tibia during antiorthostatic hypokinesis / A. M. Tatarinov [et al.]. - С.112-120. - Bibliography is at the end of the article
Інші автори: Grigor'ev A. I., Dzenis V. V., Yanson Kh. A., Oganov V. S., Rakhmanov A. S.
Кл.слова: ANTIORTHOSTATIC HYPOKINESIS, PHOTON ABSORPTIOMETRY, ACOUSTIC INDICES
Mazurin, Yu. V. Full-scale and computational experiment in an investigation of the effect of longitudinal impact loads on man / Yu. V. Mazurin, G. P. Stupakov. - С.120-124. - Bibliography is at the end of the article
Кл.слова: DYNAMIC STRENGTH, HUMAN COLUMN, MODEL OF SPINAL RESPONSE
Purinya, B. A. Relationships of the relative volumes of structural elements and biochemical components of aortic valve tissues / B. A. Purinya, B. O. Ozola, V. P. Ose. - С.125-128. - Bibliography is at the end of the article
Кл.слова: SUPPORT ELEMENTS, COLLAGEN FIBERS, ELASTIC FIBERS
Alekseenko, V. I. Nondestructive measurement of the dielectric permeability of materials by the nonsteady frequency-phase method / V. I. Alekseenko, V. I. Krylovich, P. N. Logvinovich. - С.128-132. - Bibliography is at the end of the article
Кл.слова: FREQUENCY-PHASE METHODS, GEOMETRIC DIMENSIONS, FREQUENCY-PHASE SHIFTS
Є примірники у відділах: всього 1 : чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі

3.
Шифр: М29/1987/4
   Журнал

Механика композитных материалов [Текст] : науч.-теорет.журн./ Латвийская акад. наук. - Рига : Латвийский ун-т, 1965 - . - ISSN 0203-1272. - Виходит раз на два місяця
1987р. N 4
Зміст:
Badaev, A. S. Comparative analysis of the dynamic mechanical properties of polymeric reinforcing fibers / A. S. Badaev, I. I. Perepechko, V. E. Sorokin. - С.395-399. - Bibliography is at the end of the article
Кл.слова: MECHANICAL PROPERTIES, TEMPERATURE RANGE, VISCOELASTIC BEHAVIOR
Lipatov, Yu. S. Simulation of the mechanical relaxation properties of a binder of a hybrid type with a gradient of composition and properties / Yu. S. Lipatov, L. N. Perepelitsyna, V. F. Babich. - С.400-403. - Bibliography is at the end of the article
Кл.слова: THERMOMECHANICAL BEHAVIOR, BOUNDARY LAYERS
Zaitsev, B. A. Epoxy-rolivsan compositions — heat-resistant binders for reinforced plastics / B. A. Zaitsev [et al.]. - С.404-407. - Bibliography is at the end of the article
Інші автори: Kiseleva R. F., Garkavi S. L., Kalyuzhnaya L. M.
Кл.слова: POLYMERIC COMPOSITE MATERIALS, HIGH-STRENGTH REINFORCED PLASTICS, HEAT-RESISTANT POLYMERS
Voloskov, G. A. Residual stresses and the rupture strength of epoxy-polymers / G. A. Voloskov [et al.]. - С.408-411. - Bibliography is at the end of the article
Інші автори: Morozov V. N., Gorbanova L. A., Zaitsev Yu. S., Kovriga V. V.
Кл.слова: COMPOSITE MATERIALS, EPOXY-POLYMERS, RESIDUAL STRESSES
Aliguliev, R. M. Effect of the interface on the discreteness of the segmental mobility of quartz-filled high-density polyethylene / R. M. Aliguliev, D. M. Khiteeva. - С.412-416. - Bibliography is at the end of the article
Кл.слова: FINELY DIVIDED QUARTZ, SEGMENTAL MOBILITY, INTERNAL FRICTION SPECTRA
Gavrilov, D. A. Numerical method of determining the rheologic parameters of composites from test results / D. A. Gavrilov, V. A. Markov. - С.417-421. - Bibliography is at the end of the article
Кл.слова: CREEP PARAMETERS, VISCOELASTIC MATERIALS, ELASTIC-HEREDITARY MATERIALS
Akbarov, S. D. Effect of rheologic parameters of the matrix material on the distribution of self-balanced stresses in a multilayer composite with curved structures / S. D. Akbarov. - С.421-427. - Bibliography is at the end of the article
Кл.слова: ELASTIC MODULUS, MECHANICAL PROPERTIES, TANGENTIAL STRESSES
Kolokol'chikov, V. V. Mixing of isotropic phases of quasilinear viscoelastic composites subjected to finite deformations / V. V. Kolokol'chikov. - С.428-432. - Bibliography is at the end of the article
Кл.слова: FLUID STATES, SMALL-PARAMETER METHOD, POLYMER SYSTEMS
Ermolenko, A. F. Effect of imperfections of the structure on the strength and nature of failure of unidirectional organic fiber plastics / A. F. Ermolenko. - С.433-437. - Bibliography is at the end of the article
Кл.слова: UNIDIRECTIONAL FIBER PLASTIC, STRENGTH DISTRIBUTION, ELASTIC MATRIX
Aleshin, V. I. Delamination kinetics of a unidirectional glass-reinforced plastic / V. I. Aleshin, V. S. Ekel'chik. - С.437-443. - Bibliography is at the end of the article
Кл.слова: COMPOSITE MATERIALS, FRACTURE MECHANICS, STATIONARY CRACK GROWTH
Startsev, O. V. Effect of prolonged atmospheric aging on the properties and structure of carbon plastic / O. V. Startsev [и др.]. - С.444-449. - Bibliography is at the end of the article
Інші автори: Vapirov Yu. M., Deev I. S., Yartsev V. A., Krivonos V. V., Mitrofanova E. A., Chubarova M. A.
Кл.слова: POLYMERIC MATERIALS, COMPOSITE MATERIALS, CARBON FIBERS
Grigolyuk, E. I. Theory and numerical solution of problems of the statics of multilayered reinforced shells / E. I. Grigolyuk, G. M. Kulikov. - С.450-457. - Bibliography is at the end of the article
Кл.слова: ANISOTROPIC SHALLOW SHELLS, NUMERICAL SOLUTION, RADIAL TIRES
Khoroshun, L. P. State of stress and strain of heat-sensitive cylindrical shells made of composite materials / L. P. Khoroshun, S. G. Shpakova. - С.457-462. - Bibliography is at the end of the article
Кл.слова: ORTHOTROPIC SPHERICAL SHELLS, LAMINATED PLATES, DIFFERENTIAL EQUATIONS
Fedorenko, A. G. Deformation and failure of different-scale cylindrical glass-reinforced plastic shells in internal pulsed loading / A. G. Fedorenko [et al.]. - С.463-468. - Bibliography is at the end of the article
Інші автори: Tsypkin V. I., Ivanov A. G. , Syrunin M. A., Vorontsova O. S., Kleshchevnikov O. A., Shitov A. T.
Кл.слова: CYLINDRICAL SHELLS, GLASS-EPOXY SHELLS, DYNAMIC DEFORMATION
Grachev, O. A. The effect of the properties of the material of shells of revolution with eccentric ribs on the magnitude of the critical loads / O. A. Grachev, V. I. Ignatyuk. - С.468-473. - Bibliography is at the end of the article
Кл.слова: ANISOTROPIC SHELLS, CRITICAL EXTERNAL PRESSURE, AXIAL COMPRESSION
Verizhenko, V. E. Refined model of laminated composite shell for solving the contact problem in elastoplastic statement / V. E. Verizhenko, V. K. Prisyazhnyuk, S. G. Burygin. - С.474-479. - Bibliography is at the end of the article
Кл.слова: ISOTROPIC PLATES, THIN-WALLED ELEMENTS, NONLINEAR DEFORMATION
Rikards, R. B. Mixed finite-element method in stress analysis of laminated beams / R. B. Rikards, A. K. Chate. - С.479-489. - Bibliography is at the end of the article
Кл.слова: MULTILAYER STRUCTURES, STRESS ANALYSIS, HYBRID-STRESS ELEMENTS
Nepershin, R. I. Optimum computer design of a composite cardan shaft according to the criteria of cost and weight / R. I. Nepershin, V. V. Klimenov. - С.490-494. - Bibliography is at the end of the article
Кл.слова: PENALTY FUNCTIONS, STRUCTURAL ELEMENTS, SINGLE LAYERS
Grishin, V. I. Stress intensity factors in a plate with a central transverse crack reinforced by composite straps / V. I. Grishin, T. K. Begeev. - С.494-498. - Bibliography is at the end of the article
Кл.слова: GLUEDON STRAPS, AIRCRAFT STRUCTURAL ELEMENTS, CURVILINEAR CRACKS
Piskunov, V. G. Finite-element solution of thermoelastic problems for laminated composite structures / V. G. Piskunov, V. S. Sipetov, V. S. Karpilovskii. - С.498-503. - Bibliography is at the end of the article
Кл.слова: MULTILAMINATE ELASTIC STRUCTURES, FINITE ELEMENTS METHOD, NONUNIFORM SLABS
Galich, V. A. Effect of the structure of hybrid composites with carbon fibers on the results of eddy-current inspection / V. A. Galich, A. V. Sandalov. - С.503-506. - Bibliography is at the end of the article
Кл.слова: CARBON FIBERS, PURE LIQUIDS, ELECTROTECHNICAL MATERIALS
Suvorova, Yu. V. Prediction of the fatigue resistance characteristics of carbon plastics on the basis of the results of creep and long-term strength tests / Yu. V. Suvorova [et al.]. - С.506-510. - Bibliography is at the end of the article
Інші автори: Dumanskii A. M., Strekalov V. B., Makhmutov I. M.
Кл.слова: STRESSES VARIABLE, THERMOVISCOELASTICITY, FIBER-REINFORCED COMPOSITES
Sakvarelidze, A. V. Dependence of rheologic characteristics of aging steel-fiber reinforced concrete on age, moisture content, and temperature / A. V. Sakvarelidze. - С.510-516. - Bibliography is at the end of the article
Кл.слова: CREEP CHARACTERISTICS, THERMOVISCOELASTICITY, REINFORCED-CONCRETE STRUCTURES
Malkis, N. I. Low-modulus siloxane-base composite models and possibility of using them in the photoelastic method / N. I. Malkis [et al.]. - С.517-521. - Bibliography is at the end of the article
Інші автори: Rogovina L. Z., Vasil'ev V. G., Vyaz'mitinova A. A., Kireeva L. V., Kevroleva T. I., Slonimskii G. L., Shapatin A. S.
Кл.слова: TRANSPARENT MODELS, MACROMOLECULES, PHOTOELASTIC METHOD
Є примірники у відділах: всього 1 : чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі
Перейти до описів статей

4.
Шифр: М29/1989/6
   Журнал

Механика композитных материалов [Текст] : науч.-теорет.журн./ Латвийская акад. наук. - Рига : Латвийский ун-т, 1965 - . - ISSN 0203-1272. - Виходит раз на два місяця
1989р. N 6
Зміст:
Gol'dman, A. Ya. Stress relaxation in polymeric materials under hydrostatic pressure / A. Ya. Gol'dman, N/ P/ Demenchuk, G. Kh. Murzakhanov. - С.707-714. - Bibliography is at the end of the article
Кл.слова: POLYMERIC MATERIALS, VISCOELASTIC FIBROUS, TEMPERATURE-TIME RANGE
Udris, A. O. Experimental study of the elastic and strength properties of ÉDT-10 epoxy binder in conditions of a complex stressed state / A. O. Udris, Z. T. Upitis. - С.715-720. - Bibliography is at the end of the article
Кл.слова: ADHESIVE STRENGTH, DISSIPATIVE PROPERTIES, POLYMER RESINS
Salamatina, O. B. Heat effects and the mechanism of inelastic deformation of organic glassy polymers / O. B. Salamatina [et al.]. - С.721-725. - Bibliography is at the end of the article
Інші автори: Nazarenko S. I., Rudnev S. N., Oleinik É. F.
Кл.слова: PLASTIC DEFORMATION, MACRO-MOLECULAR MECHANISMS, INTERNAL FRICTION MEASUREMENTS
Afanasenko, V. I. Shear stiffness of cellular fillers made of corrugated strip / V. I. Afanasenko. - С.726-731. - Bibliography is at the end of the article
Кл.слова: ELASTIC PARAMETERS, HONEYCOMB AIRCRAFT STRUCTURES, MECHANICAL CHARACTERISTICS
Trostyanskaya, E. B. Effect of the nature of the surface of the substrate on the structure and crack resistance of elasticized adhesives / E. B. Trostyanskaya, A. S. Grabil'nikov, G. V. Komarov. - С.731-736. - Bibliography is at the end of the article
Кл.слова: ADHESIVE COMPOUNDS, STRUCTURAL ADHESIVES, PHYSICAL-MECHANICAL PROPERTIES
Pavlov, V. I. Parameters of failure of adhesive joints in symmetric peeling / V. I. Pavlov, V. D. Galich. - С.736-740. - Bibliography is at the end of the article
Кл.слова: ADHESIVE REACTION, SIMULTANEOUS SEPARATION, COHESIVE PROPERTIES
Efremova, A. I. Study of deformation characteristics of interfacial layer in organocomposites / A. I. Efremova [et al.]. - С.741-746. - Bibliography is at the end of the article
Інші автори: Kuzub L. I., Lazorenko V. M., Irzhak V. M., Shut N. I.
Кл.слова: ORGANIC FIBERS, RIGID-CHAIN POLYMER, VISCOELASTIC PROPERTIES
Mel'ker, A. I. Computer simulation of the fluctuation initiation of slipping in a system of two weakly coupled anharmonic chains of atoms / A. I. Mel'ker, A. V. Ivanov, S. V. Govorov. - С.746-750. - Bibliography is at the end of the article
Кл.слова: CHAIN CRYSTAL, FRACTURE FLUCTUATIONS, ANHARMONIC CHAINS
Kolosov, A. E. Several aspects of determination of the adequate model of the structure of oriented fiber-reinforced composites / A. E. Kolosov, V. V. Klyavlin. - С.751-757. - Bibliography is at the end of the article
Кл.слова: TRANSVERSE SATURATION, COMPOSITE MATERIALS, FIBER-REINFORCED COMPOSITES
Tarnopol'skii, Yu. M. Composites reinforced along the cube diagonals. 2. Coefficients of linear thermal expansion / Yu. M. Tarnopol'skii, V. A. Polyakov, I. G. Zhigun. - С.758-765. - Bibliography is at the end of the article
Кл.слова: INELASTIC MODEL, MATHEMATICAL SIMULATION, THERMOMECHANICAL PROPERTIES
Lipatov, Yu. S. Viscoelastic properties of gradient interpenetrating polymer networks / Yu. S. Lipatov [и др.]. - С.765-770. - Bibliography is at the end of the article
Інші автори: Sergeeva L. M., Karabanova L. V., Rosovitskii V. F, Gorbach L. A., Babkina N. V.
Кл.слова: FREQUENCY RELAXOMETER, SIMILAR MATERIALS, GRADIENT OPTICAL FIBERS
Pelekh, V. L. Two-parameter model of the failure of adhesive joints / V. L. Pelekh, O. S. Machuga. - С.771-776. - Bibliography is at the end of the article
Кл.слова: TWO-PARAMETER MODEL, ADHESIVE-COHESIVE FAILURE, INTERFACIAL STRESSES
Grishetskii, I. V. Effect of elastic filler on the fatigue failure of thermoplastic polyurethane film at low temperature / I. V. Grishetskii [и др.]. - С.776-782. - Bibliography is at the end of the article
Інші автори: Parfeev V. M., Erykalova T. A., Borisova E. Yu.
Кл.слова: MATHEMATICAL MODELING, VOLUME FRACTION, MACROCRACKS
Bulmanis, V. N. Effect of alternating thermocycling and humidity on the strength of wound glass-fiber and organic-fiber plastics / V. N. Bulmanis [et al.]. - С.782-789. - Bibliography is at the end of the article
Інші автори: Popov N. S., Starzhenetskaya T. A., Kuz'min S. A., Milyutin G. I., Polyakov V. I.
Кл.слова: AGGRESSIVE FACTORS, POSITIVE TEMPERATURE RANGE, CYCLIC CHANGES
Nazarov, S. A. Nonlinear effects in the deformation of composites with a regular system of fine cracks / S. A. Nazarov. - С.789-795. - Bibliography is at the end of the article
Кл.слова: ASYMPTOTIC METHODS, BRITTLE FRACTURE, COLINEAR CRACKS
Belyaeva, N. A. Formation of internal stresses in production of cylindrical components / N. A. Belyaeva [et al.]. - С.795-804. - Bibliography is at the end of the article
Інші автори: Klychnikov L. V., Davtyan S. P., Khudyaev S. I.
Кл.слова: PRODUCTION PROCESS, CYLINDRICAL COMPONENTS, RESIDUAL THERMAL STRESSES
Grigolyuk, E. I. Comparative analysis of two approaches to more accurate calculation of laminate shells made of composite materials / E. I. Grigolyuk, G. M. Kulikov, P. Ya. Nosatenko. - С.804-810. - Bibliography is at the end of the article
Кл.слова: ANISOTROPIC SHELLS, COMPOSITE MATERIALS, GEOMETRICALLY NONLINEAR THEORY
Bogdanovich, A. E. Evaluation of the limits of applicability of engineering models for the calculation of laminate media in problems of transverse dynamic bending / A. E. Bogdanovich, E. V. Yarve. - С.810-821. - Bibliography is at the end of the article
Кл.слова: LAMINATED ANISOTROPIC PLATES, MULTILAYERED STRUCTURES, COMPOSITE MATERIALS
Kregers, A. F. Compromise optimization of a shallow spherical shell of fibrous composites / A. F. Kregers, M. V. Gol'dmanis, G. A. Teters. - С.822-826. - Bibliography is at the end of the article
Кл.слова: REGRESSION MODEL, MULTICRITERIAL PROBLEMS, COMPOSITE SHELLS
Nekrasov, Yu. A. Bolted joints of heavily-loaded structural elements made of composites with a polymer matrix / Yu. A. Nekrasov, V. P. Nikolaev, E. I. Stepanychev. - С.827-831. - Bibliography is at the end of the article
Кл.слова: METAL-COMPOSITE LAP JOINTS, TENSION AMOUNTS, STRESS CONCENTRATION
Narusberg, V. L. Finite element of a three-layer shell of revolution with a lightweight filler / V. L. Narusberg, A. I. Riekstin'sh, M. V. Goldmanis. - С.832-836. - Bibliography is at the end of the article
Кл.слова: MODERATE THICKNESS, COMPOSITE MATERIALS, CYLINDRICAL SHELLS
Sokolova, E. R. Evaluation of the physicochemical properties of boron-aluminum composite by the method of acoustic emission / E. R. Sokolova, N. F. Lyutikov, V. V. Chubuk. - С.837-840. - Bibliography is at the end of the article
Кл.слова: RESIDUAL THERMAL STRESS, AMPLITUDE DISTRIBUTION, COMPARATIVE CHARACTERISTIC
Є примірники у відділах: всього 1 : чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі
Перейти до описів статей

5.
Шифр: М29/1990/2
   Журнал

Механика композитных материалов [Текст] : науч.-теорет.журн./ Латвийская акад. наук. - Рига : Латвийский ун-т, 1965 - . - ISSN 0203-1272. - Виходит раз на два місяця
1990р. N 2
Зміст:
Beloshenko, V. A. Properties of epoxy polymers modified by hydrostatic treatment / V. A. Beloshenko [et al.]. - С.149-153. - Bibliography is at the end of the article
Інші автори: Pakter M. K., Beresnev B. I., Zaika T. P., Slobodina V. G., Shepel' V. M.
Кл.слова: GLOBULAR STRUCTURE, MOLECULAR INTERACTION, CROSS-LINKED POLYMERS
Said-Galiev, E. E. Influence of laser radiation on some physicomechanical properties and the chemical structure of a polymeric binder / E. E. Said-Galiev [et al.]. - С.153-159. - Bibliography is at the end of the article
Інші автори: Nikitin L. N., Krongauz E. S., Belomoina N. M., Gribova I. A., Krasnov A. P., Komarova L. I., Vinogradova N. K., Korshak V. V.
Кл.слова: POLYMER SYSTEM, POLYPHENYLQUINOXALINE, MULTICOMPONENT SYSTEMS
Malmeister, A. K. Evaluation of the role of interfaces in unidirectionally reinforced composite in tension / A. K. Malmeister. - С.160-164. - Bibliography is at the end of the article
Кл.слова: MATHEMATICAL MODELING, MEDIUM SUITABLE, DEFORMATIONS
Tarnopol'skii, Yu. M. Thermal deformation of spatially reinforced composites / Yu. M. Tarnopol'skii, V. A. Polyakov, I. G. Zhigun. - С.165-171. - Bibliography is at the end of the article
Кл.слова: THERMAL EXPANSION, INHOMOGENEOUS MATERIALS, COATED-FIBER COMPOSITES
Briedis, I. P. Predicting the non-newtonian viscosity of a melt of a polymer composite with a hybrid filler / I. P. Briedis, G. G. Teters. - С.171-176. - Bibliography is at the end of the article
Кл.слова: EFFECTIVE VISCOSITY, COORDINATE TRANSFORMATIONS, THEORETICAL RELATIONS
Bolotin, V. V. Failure of laminated composites during surface impact / V. V. Bolotin, A. A. Grishko, V. N. Shchugorev. - С.177-182. - Bibliography is at the end of the article
Кл.слова: COMPOSITE MATERIALS, STOCHASTIC MODELS, DELAMINATION-TYPE DEFECTS
Anderson, Ya. A. Failure during axial loading of a plastic reinforced at oblique angles with organic fibers / Ya. A. Anderson, V. A. Limonov, V. P. Tamuzs. - С.182-188. - Bibliography is at the end of the article
Кл.слова: FAILURE ENVELOPES, CYLINDRICAL SHELLS, INTERNAL PRESSURE
Kobelev, V. V. Pull-out of fibers from the matrix on the surface of a crack in a composite / V. V. Kobelev, A. A. Rikhter. - С.188-197. - Bibliography is at the end of the article
Кл.слова: FILAMENTARY COMPOSITE MATERIALS, GLASS-PLASTIC SHELLS, BRITTLE MATRIX COMPOSITES
Zaitsev, G. P. Fracture of composite elements with defects in compression / G. P. Zaitsev. - С.198-205. - Bibliography is at the end of the article
Кл.слова: AXIAL COMPRESSION, INTENSITY FACTOR, ISOTROPIC BODY
Shcherbakov, V. T. Experimental study of the strength and stability of shells made of a carbon-fiber-reinforced plastic / V. T. Shcherbakov, A. G. Popov. - С.205-212. - Bibliography is at the end of the article
Кл.слова: COMPOSITE MATERIALS, LOAD-CARRYING CAPACITY, ORTHOTROPIC MATERIALS
Partsevskii, V. V. Failure by shear near holes in composites / V. V. Partsevskii, M. I. Speranskii. - С.211-215. - Bibliography is at the end of the article
Кл.слова: INTERLAMINAR FRACTURE, VISCOELASTIC COMPOSITE MATERIALS, FRACTURE MECHANISMS
Leonova, I. E. Experimental investigation of the anisotropy of strength of bolted joints of laminated composites upon variation of geometric and design parameters / I. E. Leonova, M. I. Semin. - С.216-220. - Bibliography is at the end of the article
Кл.слова: GEOMETRIC PARAMETERS, PRELIMINARY TIGHTENING, GRAPHICALLY GENERALIZED
Petrov, A. I. Annealing of tensioned amorphously crystalline polymers with microdiscontinuties / A. I. Petrov [et al.]. - С.220-225. - Bibliography is at the end of the article
Інші автори: Razuvaeva M. V., Sinani A. B., Egorov V. M., Betekhtin V. I.
Кл.слова: SUBMICROSCOPIC CRACKS, VISCOELASTIC PROPERTIES, MECHANICAL PROPERTIES
Kruzhkova, E. Yu. Properties of epoxy organic carbon plastics under conditions of thermohumid aging / E. Yu. Kruzhkova [et al.]. - С.225-231. - Bibliography is at the end of the article
Інші автори: Perov Yu. Yu., Lokshin V. A., Mel'nikov P. V.
Кл.слова: MOISTURE ABSORPTION, ORGANIC PLASTIC, MECHANICAL CHARACTERISTICS
Mitkevich, A. B. Nonlinear problems of the design and deformation of pressure vessels made of composite materials / A. B. Mitkevich, V. D. Protasov. - С.231-236. - Bibliography is at the end of the article
Кл.слова: PRESSURE VESSELS, RUBBER-CORD SHELL, DEFORMED STATE
Vorobei, V. V. Certain applied problems of the mechanics of dimensionally stable structures made of composites / V. V. Vorobei, N. I. Voitkov. - С.236-243. - Bibliography is at the end of the article
Кл.слова: FINITE ELEMENTS METHOD, HOLOGRAPHIC INTERFEROMETRY, SPECKLE INTERFEROMETRY
Rach, V. A. Analysis of mass perfection of miniature organoplastic pressure tanks / V. A. Rach. - С.243-248. - Bibliography is at the end of the article
Кл.слова: COMPOSITE MATERIALS, AIRCRAFT PRODUCTION, LOCAL-FIRE-FIGHTING SYSTEMS
Sukhinin, S. N. Some special features of the loss of stability of three-layered shells made of composite materials and subjected to torsion / S. N. Sukhinin. - С.248-254. - Bibliography is at the end of the article
Кл.слова: SIMULTANEOUS ACTION, LOCAL LOADS, ELASTIC SYSTEMS
Kulikov, G. M. Nonaxisymmetric loading of a prestressed multilayered reinforced shell / G. M. Kulikov. - С.254-258. - Bibliography is at the end of the article
Кл.слова: NUMERICAL SOLUTION, ANISOTROPIC SHELLS, COMPOSITE MATERIALS
Matis, I. G. Investigation of the state of water sorbed by an organic polymer by high-resolution1H nuclear magnetic resonance and differential thermal analysis / I. G. Matis, G. M. Kerch, A. N. Aniskevich. - С.259-262. - Bibliography is at the end of the article
Кл.слова: WATER MOLECULES, COMPOSITE INCREASES, NMR SPECTRUM
Aniskina, T. A. Optimizing the gradation of carbonyl iron powders / T. A. Aniskina [et al.]. - С.263-267. - Bibliography is at the end of the article
Інші автори: Andreichenko V. B., Komarov B. A., Rozenberg B. A.
Кл.слова: EFFECT OF PARTICLE-SIZE, GRANULAR MEDIA, MULTICOMPONENT SYSTEMS
Valuiskikh, V. P. Problem of optimal density distribution in the bearing components of articles formed from integral foam plastics / V. P. Valuiskikh. - С.268-273. - Bibliography is at the end of the article
Кл.слова: BEARING PANELS, LIGHTWEIGHT STRUCTURAL MATERIALS, INTEGRAL FOAM PLASTICS
Є примірники у відділах: всього 1 : чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі
Перейти до описів статей

6.
Шифр: М29/1990/3
   Журнал

Механика композитных материалов [Текст] : науч.-теорет.журн./ Латвийская акад. наук. - Рига : Латвийский ун-т, 1965 - . - ISSN 0203-1272. - Виходит раз на два місяця
1990р. N 3
Зміст:
Kulichikhin, S. G. Rheokinetics of the gel formation of solutions of binders based on urea-formaldehyde resins / S. G. Kulichikhin [et al.]. - С.275-278. - Bibliography is at the end of the article
Інші автори: Shambilova G. K., Rybina O. E., Kozhina V. A., Lazutina T. P., Produvalova S. S., Malkin Ya. A.
Кл.слова: POLYMER MATERIALS, PHYSICOMECHANICAL PROPERTIES, EPOXYPHENOL MATRIX
Volkova, N. N. Kinetic laws of the thermal degradation of epoxide-resin-based composites / N. N. Volkova [et al.]. - С.278-284. - Bibliography is at the end of the article
Інші автори: Summanen E. V., Smirnov L. P., Dzhavadyan É. A., Ponomareva T. I., Rozenberg B. A.
Кл.слова: POLYEPOXIDE COMPOSITES, THERMAL DEGRADATION, BLOCK POLYMERS
Volkov, A. V. Molecular interaction in composite materials based on polycaproamide and epoxy resins / A. V. Volkov [et al.]. - С.284-288. - Bibliography is at the end of the article
Інші автори: Myasnikova N. A., Kolesnikov V. I., Kanovich M. Z.
Кл.слова: NONIDEAL ADHESIVE BOND, DISPERSELY-FILLED COMPOSITE, TEMPERATURE DEPENDENCE
Zaborskaya, L. V. Study of the features of combination of disperse polysulfone with reinforcing fibers in fabrication of composite materials / L. V. Zaborskaya [et al.]. - С.288-292. - Bibliography is at the end of the article
Інші автори: Yurkevich O. R., Dovgyalo V. A., Pisanova E. V.
Кл.слова: POLYMERIC MATERIALS, THERMOPLASTIC BINDERS, POLYCARBONATE
Pobedrya, B. E. Accuracy of effective characteristics in the mechanics of composites / B. E. Pobedrya. - С.293-298. - Bibliography is at the end of the article
Кл.слова: COMPUTATIONAL MECHANICS, EFFECTIVE PLASTIC MODULI, COMPOSITE FAILURE
Zavalishin, N. N. Deformation model for heterogeneous elastic materials / N. N. Zavalishin, I. A. Dymkov, A. A. Ryndakov. - С.299-303. - Bibliography is at the end of the article
Кл.слова: iNELASTIC MICROMECHANICS, MYOCARDIAL MATERIAL MECHANICS, MUSCLE TISSUE
Buryachenko, V. A. One-particle approximation of the effective-field method in the statics of composites / V. A. Buryachenko, V. Z. Parton. - С.304-309. - Bibliography is at the end of the article
Кл.слова: MATRIX COMPOSITES, ELLIPSOIDAL INCLUSIONS, MORI-TANAKA'S THEORY
Gai, M. I. Percolation effects in the mechanics of composite materials / M. I. Gai, L. I. Manevich, V. G. Oshmyan. - С.310-314. - Bibliography is at the end of the article
Кл.слова: NONHOMOGENEOUS ELASTICITY, PERCOLATION SYSTEM, MECHANICAL PROPERTIES
Gailite, M. P. Evaluating the thermal conductivity of foam plastics / M. P. Gailite [et al.]. - С.315-319. - Bibliography is at the end of the article
Інші автори: Tolks A. M., Lagzdin A. Zh., Terauds A. É.
Кл.слова: RIGID URETHANE FOAMS, HEAT TRANSFER, ANISOTROPIC REINFORCEMENT
Stepanova, T. R. Dependence of residual stresses in boron-aluminum on structural features of the material and preliminary thermomechanical treatment / T. R. Stepanova. - С.319-323. - Bibliography is at the end of the article
Кл.слова: FIBER-MATRIX INTERFACE, AXIAL RERESIDUAL STRESSES, VOLUME CONTENT
Askadskii, A. A. Approximation of relaxation curves in the nonlinear region of mechanical behavior by means of new relaxation kernels / A. A. Askadskii, M. P. Valetskii. - С.324-328. - Bibliography is at the end of the article
Кл.слова: RELAXATION KERNELS, RELAXATION OSCILLATORS, MECHANICAL RESPONSE
Ivanov, V. D. Computation of wave processes in hereditary viscoelastic media / V. D. Ivanov, I. V. Petrov, Yu. V. Suvorova. - С.329-332. - Bibliography is at the end of the article
Кл.слова: HEREDITARY THEORY OF VISCOELASTICITY, CREEP THEORY, ISOTROPIC MEDIUM
Plastinin, A. V. Determination of the dynamic compression diagram of spheroplastic / A. V. Plastinin, V. V. Sil'vestrov, N. N. Gorshkov. - С.333-336. - Bibliography is at the end of the article
Кл.слова: SYNTACTIC FOAM PLASTICS, HOPKINSON PRESSURE BAR, ELASTIC CONSTANTS
Demeshkin, A. G. Experimental investigation of the effect of the strain rate on the strength characteristics of glass-epoxy rings / A. G. Demeshkin. - С.336-340. - Bibliography is at the end of the article
Кл.слова: ENGINE CONSTRUCTION, ANNULAR SPECIMENS, DYNAMIC STRESS-STRAIN DIAGRAMS
Dimitrienko, Yu. I. Deformation and strength of degradable heat-protective materials / Yu. I. Dimitrienko, I. S. Epifanovskii. - С.341-348. - Bibliography is at the end of the article
Кл.слова: THERMOCHEMICAL DESTRUCTION, HIGH-TEMPERATURE STREAM, VISCOELASTIC COMPOSITES
Selikhov, A. F. Special features in ensuring strength and service life of aircraft structures made of polymer composite materials, with damage taken into account / A. F. Selikhov, V. F. Kut'ynov, A. E. Ushakov. - С.349-357. - Bibliography is at the end of the article
Кл.слова: CARBON-PLASTIC SHELLS, CIVILIAN AIRCRAFT, CARBON-PLASTIC PANELS
Usyukin, V. I. Fundamentals of the theory and calculation of soft thin-walled structures of composite materials / V. I. Usyukin. - С.357-361. - Bibliography is at the end of the article
Кл.слова: EVERTING TOROIDAL DEVICES, SOFT SHELLS, COMPOSITE PANELS
Medvedev, A. A. Refinement of the elastic and stiffness characteristics of spiral-wound heads in the region of polar openings / A. A. Medvedev, V. D. Protasov. - С.362-366. - Bibliography is at the end of the article
Кл.слова: COMPOSITE MATERIALS, OPTIMUM REINFORCEMENT, POLAR OPENING
Rach, V. A. Optimization of cylindrical pressure vessels with respect to weight / V. A. Rach. - С.366-370. - Bibliography is at the end of the article
Кл.слова: SMALL PRESSURE VESSELS, FIBER STRENGTH, FAILURE MODES
Netrebko, V. P. Modeling the mean stresses in structural elements made of fiber composites / V. P. Netrebko. - С.371-375. - Bibliography is at the end of the article
Кл.слова: ABOVE-EXAMINED PROBLEMS, FIBER COMPOSITES, SPECIAL ELECTION
Freger, G. E. Calculation and optimum design of composite elements of rod structures / G. E. Freger, N. A. Karvasarskaya. - С.376-381. - Bibliography is at the end of the article
Кл.слова: MACHINE PARTS, HYBRID FILLERS, COMPOSITE BRAIDED STRUCTURE
Zubko, V. I. Cylindrical bending of a packet of transversely isotropic plates in the presence of zones of adhesion, slip, and delamination / V. I. Zubko, B. N. Polevoi, V. M. Shopa. - С.381-385. - Bibliography is at the end of the article
Кл.слова: TRANSVERSE SHEAR, TWO-LAYER PLATE, EFFECT OF FRICTION
Paimushin, V. N. Mathematical modeling of processes of devising fibrous composite materials and thin-walled structural elements by forced winding / V. N. Paimushin, I. N. Sidorov. - С.386-398. - Bibliography is at the end of the article
Кл.слова: VOLUME FRACTION, OBTAINED AVERAGED EQUATIONS, THIN-WALLED ELEMENTS
Meshkov, E. V. Effect of production factors on the mechanical characteristics of a unidirectional organoplastic / E. V. Meshkov [et al.]. - С.398-405. - Bibliography is at the end of the article
Інші автори: Kulik V. I., Nilov A. S., Upitis Z. T.
Кл.слова: UNIDIRECTIONAL FIBERGLASSES, MECHANISM RESPONSIBLE, UNIDIRECTIONAL FIBERGLASS
Arkhipov, G. V. Influence of the placing of fibers on the compaction of stacked compacts of fibrous metal composite / G. V. Arkhipov, N. A. Drozdova, A. V. Satarov. - С.406-412. - Bibliography is at the end of the article
Кл.слова: BORON-ALUMINUM COMPOSITE, FIBROUS COMPOSITES, FINITE ELEMENT METHOD
Є примірники у відділах: всього 1 : чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі
Перейти до описів статей

7.
Шифр: U557044/2010/72/3
   

Scientific bulletin [Text]. Ser. B , Chemistry and Materials Science. - Bucharest : Politehnica Press, 1929 - . - ISSN 1454-2331. - Виходить кожного кварталу
2010р. т.72 N 3 . - 25.00, грн
Зміст:
Dimonie, M. Biodegradable blends based on phb and wood fiber / M. Dimonie, M. Rapa. - P.3-10. - Bibliography is at the end of the article
Кл.слова: МЕТАЛОКЕРАМІКА, ПОРОШКОВЕ ЛИТТЯ ПІД ТИСКОМ, ВИХІДНА СИРОВИНА
Raicopol, M. D. Solid–phase supported chiral tricarbonyl–chromium complexes / M. D. Raicopol [end etc.]. - P.11-20. - Bibliography is at the end of the article
Інші автори: Lehadus R., Ott C., Stan R., Rosca S. I.
Кл.слова: ТВЕРДОФАЗНІ НАНЕСЕНІ КАТАЛІЗАТОРИ, ТРИКАРБОНІЛХРОМОВІ КОМПЛЕКСИ, ЩЕПЛЕННЯ
Stanescu, M. D. Enzimes in cotton bio–scouring / M. D. Stanescu [end etc.]. - P.21-28. - Bibliography is at the end of the article
Інші автори: Dochia M., Fogorasi M., Pustianu M., Bucur M. S.
Кл.слова: БАВОВНА, ПЕКТИНАЗА, БІОЧИСТКА
Soare, M. -L. Electrochemical studies on some indolizine carboxylates with potential application / M.-L. Soare [end etc.]. - P.29-44. - Bibliography is at the end of the article
Інші автори: Bujduveanu M. R., Ungureanu E.-M., Georgescu E.
Кл.слова: ЦИКЛІЧНА ВОЛЬТАМПЕРОМЕТРІЯ, ЕТИЛ, ЕЛЕКТРОХІМІЧНЕ ДОСЛІДЖЕННЯ СПОЛУК
Nica, A. Environmental assessment of citric acid production / A. Nica, A. Woinaroschy. - P.45-56. - Bibliography is at the end of the article
Кл.слова: ЕКОЛОГІЧНА ОЦІНКА, ЛИМОННА КИСЛОТА, АМІДОН
Epure, G. GC/MS studies on alcohol derivatization procedures applied to lewisite 1 due to the increased instability of some ethers / G. Epure, N. Grigoriu, L. Filipescu. - P.57-66. - Bibliography is at the end of the article
Кл.слова: КОНВЕНЦІЯ ПРО ХІМІЧНУ ЗБРОЮ, ДЕРИВАТІЗАЦІЯ, ЕФІРИ
Ioan, D. L. A study regarding the surface properties of rubbers–based adhesive assemblies / D. L. Ioan [end etc.]. - P.67-76. - Bibliography is at the end of the article
Інші автори: Dusescu I., Zaharia C., Hubca G.
Кл.слова: КЛЕЙОВІ РОЗЧИНИ, ПОВЕРХНЕВИЙ НАТЯГ, НАТУРАЛЬНИЙ КАУЧУК
Olaru, R. N. Microstructure of partially hydrolyzed polyvinyl alcohols used in pvc–s technology / R. N. Olaru [end etc.]. - P.77-84. - Bibliography is at the end of the article
Інші автори: Vuluga D. M., Georgescu F., Marinescu D., Dimonie M.
Кл.слова: ПОЛІВІНІЛОВІ СПИРТИ, АЛКОГОЛЬ, ДОВЖИНА
Ursu, A. -V. Hydrodynamic aspects of fluidized bed stabilized in magnetic field / A.-V. Ursu [end etc.]. - P.85-98. - Bibliography is at the end of the article
Інші автори: Nistor I. D., Gros F., Arus A. V., Isopencu G., Mares A. M.
Кл.слова: ГІДРОДИНАМІКА МАГНІТНИХ ЧАСТИНОК, НАПРУЖЕНІСТЬ МАГНІТНОГО ПОЛЯ, ТОВАРНА СТАЛЬ
Niculescu, M. Removal chromium pollution from leather industries wastes / M. Niculescu, A. D. Ionita, L. Filipescu. - P.99-114. - Bibliography is at the end of the article
Кл.слова: ХРОМОВА ШКІРА, ЧЕРВОНИЙ ШЛАМ, АДСОРБЦІЯ
Diaconu, M. Structural characterization of chitosan coated silicon nanoparticles –a ft–ir approach / M. Diaconu [end etc.]. - P.115-122. - Bibliography is at the end of the article
Інші автори: Tache A., Eremia S., Gatea F., Litescu S., Radu G. L.
Кл.слова: НАНОЧАСТИНКИ КРЕМНІЮ, БІОФУНКЦІОНАЛІЗАЦІЯ, СТРУКТУРНИЙ АНАЛІЗ
Stoenica, M. Thresholded operating parameters impact upon the biological wastewater treatment facility / M. Stoenica, V. Lavric. - P.123-136. - Bibliography is at the end of the article
Кл.слова: ПОРІГ, КОЕФІЦІЄНТ РЕЦИРКУЛЯЦІЇ, ОЧИЩЕННЯ СТІЧНИХ ВОД
Tamas, E. Microbial products as natural alternative to fertilisers: isolation and characterisation of nitrogen fixing bacteria / E. Tamas [end etc.]. - P.137-144. - Bibliography is at the end of the article
Інші автори: Mara G., Laslo E., Gyorgy E., Mathe I., Abraham B., Lanyi S.
Кл.слова: АЗОТФІКСУЮЧІ РИЗОБАКТЕРІЇ, РИЗОСФЕРА, ІЗОЛЯЦІЯ
Stoian, M. G. A bank robbery – a puzzle solved by forensic chemistry examination / M. G. Stoian [end etc.]. - P.145-162. - Bibliography is at the end of the article
Інші автори: Galan E., Andreescu G., Nechifor G.
Кл.слова: НАСИЛЬНИЦЬКІ ЗЛОЧИНИ, СПЕКТРОМЕТРІЯ, СЛІДИ ДОКАЗІВ
Damian, C. -M. Ethylenediamine functionalization effect on the thermo–mechanical properties of epoxy nanocomposites reinforced with multiwall carbon nanotubes / C.-M. Damian, A. M. Pandele, H. Iovu. - P.163-174. - Bibliography is at the end of the article
Кл.слова: ФУНКЦІОНАЛІЗАЦІЯ, НАНОТРУБКИ, ЕПОКСИДНІ НАНОКОМПОЗИТИ
Diaconu, E. Forecasting the sorption of phosphates in soil with artificial neural networks / E. Diaconu [end etc.]. - P.175-182. - Bibliography is at the end of the article
Інші автори: Orbulet O. D., Miron A. R., Modrogan C.
Кл.слова: СОРБЦІЯ ФОСФАТІВ, ШТУЧНІ НЕЙРОННІ МЕРЕЖІ, ПРОГНОЗУВАННЯ
Onisei, S. Influence of mechanical activation on the kinetics of non ferrous metal sulphides oxidation / S. Onisei [end etc.]. - P.183-192. - Bibliography is at the end of the article
Інші автори: Moldovan P., Mara L., Predica V., Lupu C.
Кл.слова: МЕХАНІЧНА АКТИВАЦІЯ, ОКИСЛЕННЯ ПІД ТИСКОМ, ЛУЖНІ СЕРЕДОВИЩА
Cojocaru, V. D. Mechanical behaviour comparison between un–processed and ecap (Equal Channel Angular Pressing) processed 6063–T835 aluminum alloy / V. D. Cojocaru [end etc.]. - P.193-202. - Bibliography is at the end of the article
Інші автори: Raducanu D., Serban N., Cinca I., Saban R.
Кл.слова: МЕХАНІЧНА ОБРОБКА, АЛЮМІНІЄВІ СПЛАВИ, НАНОКРИСТАЛІЧНІ МАТЕРІАЛИ
Faur, M. Morphology of the metallic tin allotropic transformation and impurities role in structural stability assurance / M. Faur [end etc.]. - P.203-210. - Bibliography is at the end of the article
Інші автори: Kappel W., Ghiban B., Enescu E., Lungu M.
Кл.слова: ОЛОВО, КРИСТАЛІЧНА СТРУКТУРА, ПОЛІМОРФНЕ ПЕРЕТВОРЕННЯ
Enescu, M. C. Simulation de resistence a la traction et compression dans un composite macromoleculaire / M. C. Enescu. - P.211-218. - Bibliography is at the end of the article
Кл.слова: НАНОКОМПОЗИТИ, КОМПРЕСІЯ, ТЯГА
Pirvulescu, C. M. Mechanic vibrations generation system and effect on the casting alloys solidification process / C. M. Pirvulescu, C. Bratu. - P.219-232. - Bibliography is at the end of the article
Кл.слова: ВІБРАЦІЇ, СПЛАВИ, ЛИТТЯ В МЕТАЛЕВІ ФОРМИ
Filcenco-Olteanu, A. Selective recovery of gold from hydrochloric solutions with amberlite xad–7 ion–exchange resin / A. Filcenco-Olteanu [end etc.]. - P.233-242. - Bibliography is at the end of the article
Інші автори: Dobre T., Radulescu R., Panturu E., Panturu R.
Кл.слова: ЗОЛОТО, ВІДНОВЛЕННЯ, ХЛОРИДНЕ СЕРЕДОВИЩЕ
Bahrim, M. The inclusion study and the determination of aluminum and insoluble calcium in aircraft steel samples / M. Bahrim. - P.243-252. - Bibliography is at the end of the article
Кл.слова: ІСКРОВА ДІАГРАМА, ДОСЛІДЖЕННЯ ВКЛЮЧЕНЬ, АВІАЦІЙНА СТАЛЬ
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

8.
Шифр: F120426/2003/3/13
   

Facta universitatis [Текст]. Ser., Mechanics, automatic control and robotics. - Nish : University of Nis, 1986 - . - ISSN 0354-2009. - Виходить тричі на рік
2003р. т.3 N 13 . - 41.00, р.
Зміст:
Gdoutos, E. E. Fracture mechanics of rubber / E. E. Gdoutos, I. M. Daniel, P. Schubel. - P.497-510. - Bibliography is at the end of the article
Кл.слова: MATERIAL PROPERTY, PARTICULAR VULCANIZED RUBBER, ELASTOMERIC MATERIALS
Katica, (Stevanović) Hedrih. Methods for solving problems of electroelastic piezoelectric bodies with defect applying spatial analysis in MATLAB / (Stevanović) Hedrih Katica, Perić Ljubiša. - P.511-532. - Bibliography is at the end of the article
Кл.слова: EXTERNAL MECHANICAL STRESSES, PIEZOCERAMIC MATERIAL, ELECTRIC FIELDS
Jörg, F. Kalthoff Failure methodology of mode-ii loaded cracks / F. Kalthoff Jörg. - P.533-552. - Bibliography is at the end of the article
Кл.слова: LINEAR-ELASTIC, PLASTIC ZONES, FRACTURE TOUGHNESS VALUES
Vukobrat, M. Conservation laws in the dynamics of cossera curves - application to the fracture mechanics / M. Vukobrat. - P.553-558. - Bibliography is at the end of the article
Кл.слова: NON-COPLANAR DIRECTOR VECTORS, BOUNDARY CONDITIONS, EUCLIDEAN INVARIANCE
Dragan, B. Jovanović Potential energy state during crack propagation in discrete model of material / B. Jovanović Dragan. - P.559-572. - Bibliography is at the end of the article
Кл.слова: ENERGETIC STRUCTURE, ATOMIC LATTICE, STRAIN ENERGY SURFACES
Jelena, M. Veljković Application of the interface crack concept to problem of a crack between a thin layer and a substrate / M. Veljković Jelena, R. Nikolić Ružica. - P.573-581. - Bibliography is at the end of the article
Кл.слова: STRESS INTENSITY FACTORS, RESIDUAL TENSILE STRESSES, SPECIMEN GEOMETRY
Luxmoore, A. R. An R-curve assessment of stable crack growth in an aluminium alloy / A. R. Luxmoore. - P.583-597. - Bibliography is at the end of the article
Кл.слова: CONTOUR GEOMETRY, BRITTLE BEHAVIOUR, CRACK EXTENSION
David, J. Unger New class of solutions of the reduced wave equation applicable to crack problems related to gradient elasticity / J. Unger David, C. Aifantis Elias. - P.599-612. - Bibliography is at the end of the article
Кл.слова: HANKEL OPERATORS, EQUATION APPEAR, PARTICULAR GRADIENT
Schindler, H. J. An engineering concept to account for crack-tip constraints / H. J. Schindler. - P.613-622. - Bibliography is at the end of the article
Кл.слова: CLOSED-FORM EQUATIONS, FRACTURE MECHANICS, NON-EQUAL CONSTRAINTS
Marsavina, L. Similarities between small-scale yielding interfacial free-edge joint and crack-tip fields / L. Marsavina, A. D. Nurse. - P.623-634. - Bibliography is at the end of the article
Кл.слова: ASYMPTOTIC FIELDS, PLASTIC BEHAVIOUR, FUNDAMENTAL EQUATIONS
Jelaska, D. Closed form expression for fatigue life prediction at combined HCF/LCF loading / D. Jelaska, S. Glodez, S. Podrug. - P.635-646. - Bibliography is at the end of the article
Кл.слова: STRESS HISTORY, CRACK PROPAGATION, DESIGNED FATIGUE LIFE
Chris, A Rodopoulos. The effect of stress ratio on the behaviour of short fatigue cracks in aluminium alloys / A Rodopoulos Chris, R. de los Rios Eduardo. - P.647-655. - Bibliography is at the end of the article
Кл.слова: FATIGUE DAMAGE MAP, STRESS RATIO, GROWTH IRREGULARITIES
M., de Freitas Evaluation of small crack growth models for notched specimen under axial/torsional fatigue loading / de Freitas M., L. Reis, B. Li. - P.657-669. - Bibliography is at the end of the article
Кл.слова: VARIOUS MULTILAYER, REPLICAS METHOD, NON-PROPORTIONAL FATIGUE
Labeas, G. Efficient engineering approaches for the prediction of fatigue propagation of corner cracks in the case of multiple site damage / G. Labeas, Th. Kermanidis, J. Diamantakos. - P.671-688. - Bibliography is at the end of the article
Кл.слова: CORNER CRACK PROPAGATION, THREE-DIMENSIONAL ANALYSIS, STRESS INTENSITY FACTORS
Labeas, G. Assessment of widespread fatigue damage in the presence of corrosion / G. Labeas [et al.]. - P.689-706. - Bibliography is at the end of the article
Інші автори: Diamantakos J., Kermanidis Al., Pantelakis Sp.
Кл.слова: AIRCRAFT STRUCTURES, APPROPRIATE ANALYSIS, EFFECT OF CORROSION
Čačko, J. Modelling of a material degradation and damage mechanics in machine structures under service loading / J. Čačko. - P.707-714. - Bibliography is at the end of the article
Кл.слова: MACHINE ENGINEERING, HYSTERESIS LOOPS, CUMULATIVE DEGRADATION PROCESS
Nenad, Gubeljak. Unstable fracture behaviour of weld metal at a high strength low alloy steel / Gubeljak Nenad. - P.715-727. - Bibliography is at the end of the article
Кл.слова: LOCAL BRITTLE ZONES, PRO-EUTECTOID FERRITE, WELD METAL
Tsamasphyros, G. J. Computer software for the stress analysis of repaired aircraft structures with the method of composite patch repair / G. J. Tsamasphyros, Marioli-Riga Zaira, Vrettos Chris. - P.729-738. - Bibliography is at the end of the article
Кл.слова: FRACTURE MECHANICS PROBLEMS, METALLIC STRUCTURE, METALLIC AIRCRAFT STRUCTURES
Eitoku, Nakanishi. Microscopic observation of fiber deformation and fracture during machining of A-FRP / Nakanishi Eitoku, Sawaki Yutaka, Isogimi Kiyoshi. - P.739-744. - Bibliography is at the end of the article
Кл.слова: FRACTURAL PHENOMENA, ELASTIC FOUNDATION, MATRIX IN TRANSMITTAL
Zaira, P. Marioli-Riga Evaluation of eddy current sensitivity for the inspection of crack propagation under a composite patch / P. Marioli-Riga Zaira, G. J. Tsamasphyros, G. N. Kanderakis. - P.745-754. - Bibliography is at the end of the article
Кл.слова: COMPOSITE MATERIALS, FINITE ELEMENTS ANALYSIS, CRACK PROPAGATION
Carpinteri, A. Damage diagnostic in concrete and masonry structures by acoustic emission technique / A. Carpinteri, G. Lacidogna. - P.755-764. - Bibliography is at the end of the article
Кл.слова: STRUCTURAL CONDITIONS, ACOUSTIC EMISSION, DEGRADATION PROCESS
Andrianov, I. V. Homo analiticus or homo computicus? / I. V. Andrianov, Awrejcewicz Jan. - P.765-770. - Bibliography is at the end of the article
Кл.слова: BIFURCATION POINTS, GENERAL PUBLIC WAY, COMPUTER SIMULATION
Čomić, I. Some remarks on the 6th international conference of tensor society on differential geometry & its applications and mathematical foundations of information sciences & its applications / I. Čomić. - P.771-772
Кл.слова: SCIENTIFIC SCHOOLS, SCHOOL OF GEOMETERS, DIFFERENTIAL GEOMETRY
Tamássy, L. Professor Akitsugu Kawaguchi / L. Tamássy. - P.775-777
Кл.слова: DIFFERENTIAL GEOMETRY, FINSLER GEOMETRY, MATHEMATICAL JOURNALS
Katica, (Stevanović) Hedrih. International symposium on analysis, manifolds and mechanics / (Stevanović) Hedrih Katica. - P.778
Кл.слова: MATHEMATICAL SCIENCES, FINSLER GEOMETRY, GRAVITATIONAL THEORY
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

9.
Шифр: S959205/2012/74/4
   

Scientific bulletin [Text]. Ser. D, Mechanical Engineering. - Bucharest : Politehnica Press, 1929 - . - ISSN 1454-2358. - Виходить кожного кварталу
2012р. т.74 N 4 . - 83.00, грн
Зміст:
Staicu, Stefan. Joint forces in dynamics of a spatial parallel manipulator / S. Staicu. - P.3–12. - Bibliography is at the end of the article
Кл.слова: KINEMATICS ANALYSIS, DYNAMICS, ROBOTS
Bogos, Stefan. Similarity criteria for “full” and “scale” aircraft on the lateral stability analysis / S. Bogos, S. Ion. - P.13–26. - Bibliography is at the end of the article
Кл.слова: AIRPLANES, AERODYNAMIC MODELS, DYNAMICS
Geacăr, Claudiu-Miha. Language modeling in air traffic control / C. -M. Geacăr, D. C. Ion, A. -M. Stoica. - P.27–36. - Bibliography is at the end of the article
Кл.слова: VOICEA RECOGNITION, LANGUAGE ISSUES, RADIO COMMUNICATIONS
Adîr, Victor G. Sliding mode control of a 4Y octorotor / V. G. Adîr, A. M. Stoica, J. F. Whidborne. - P.37–52. - Bibliography is at the end of the article
Кл.слова: CONTROL LAWS, AUTONOMOUS UAV, DYNAMICS
Ion, Dan Cristian. Estimation of the cost function using bayesian approach / D. C. Ion, C. Geacăr. - P.53–60. - Bibliography is at the end of the article
Кл.слова: MFNFGING AIRPORTS, COST FUNCTION, AIRPORT INDUSTRY BUSINESS
Filipoiu, Andrei. Severity assessment for aeronautical risk analysis / A. Filipoiu, C. Radu, C. Berbente. - P.61–74. - Bibliography is at the end of the article
Кл.слова: ACCIDENTS, AIRPORTS, AVIATION
Dumitriu, Mădălina. Influence of the suspension damping on ride comfort of passenger railway vehicles / M. Dumitriu. - P.75–90. - Bibliography is at the end of the article
Кл.слова: MOVEMENT EQUATIONS, DAMPING, RANDOM VIBRATIONS
Roşca, Mircea Augustin. Methods for green times allocation in under-saturated signalized intersection / M. A. Roşca, A. Ruscă. - P.91–104. - Bibliography is at the end of the article
Кл.слова: TRAFFIC CONGESTION, CRITICAL MOVEMENTS, TRAFFIC FLOWS
Soriga, Iuliana. Thermal analysis of a linear fresnel lens solar collector with black body cavity receiver / I. Soriga, C. Neaga. - P.105–116. - Bibliography is at the end of the article
Кл.слова: SOLAR THERMAL CONVERSION, STUDIES, SOLAR ENERGY
Petrescu, Stoian. Entropy generation analysis and COP evaluation for a reversed quasi-Carnot cycle (refrigeration machine) by using the direct method from finite speed thermodynamics / St. Petrescu [et al.]. - P.117–136. - Bibliography is at the end of the article
Інші автори: Dobre C., Costea M., Dobrovicescu Al., Tîrcă-Dragomirescu G.
Кл.слова: THERMODYNAMIC, VAPOR, FRICTION COEFFICIENT
Ionascu, Georgeta. Simulation aspects of performance and experimental procedures for a microaccelerometer / G. Ionascu [et al.]. - P.137–148. - Bibliography is at the end of the article
Інші автори: Sandu A., Bogatu L., Comeaga C. D., Manea T., Besnea D.
Кл.слова: SILICON, MICROMECHATRONIC DEVICES, VIBRATION TESTING
Constantin, Corina. FEM tools for cutting process modeling and simulation / C. Constantin [et al.]. - P.149–162. - Bibliography is at the end of the article
Інші автори: Croitoru S.-M., Constantin G., Strajescu E.
Кл.слова: TITANIUM ALLOYS, FINITE ELEMENT, MACHINING PROCESSES
Piscan, Iuliana. Experimental investigation of the frictional contact in the pre-sliding regime / I. Piscan. - P.163–176. - Bibliography is at the end of the article
Кл.слова: HYSTERESIS, FRICTION FORCES, EQUIVALENT DAMPING
Popa, Camelia. Peripheral surface profiling of the hob cutter for screw compressor rotors components I. Female rotor / C. Popa, N. Oancea. - P.177–188. - Bibliography is at the end of the article
Кл.слова: HELICAL SURFACES, CUTTER, SOFTWARE
Georgescu, Andrei-Mugur. Time efficient computing of the power coefficient for a ducted Achard turbine / A. -M. Georgescu [et al.]. - P.189–200. - Bibliography is at the end of the article
Інші автори: Georgescu S.-C., Petre A.-M., Badea I.
Кл.слова: NUMERICAL MODELLING, FLOWS, ENERGY CONVERSION
Rada, Elena Cristina. Energy recovery from tyres waste through thermal option / E. C. Rada [et al.]. - P.201–210. - Bibliography is at the end of the article
Інші автори: Ragazzi M., Maschio R. D., Ischia M., Panaitescu V. N.
Кл.слова: PYROLYSIS, WASTES, DISPOSAL
Ciuta, Simona. Comparison between two case study on water kiosks / S. Ciuta [et al.]. - P.211–218. - Bibliography is at the end of the article
Інші автори: Torretta V., Trulli E., Apostol T.
Кл.слова: BOTTLED WATER, ENVIRONMENTAL BALANCE, WATER SUPPLY
Manea, Elena. Parameter influence on the anaerobic digestion kinetics / E. Manea [et al.]. - P.219–226. - Bibliography is at the end of the article
Інші автори: Robescu D. N., Manea D., Robescu D. L.
Кл.слова: WASTEWATER, REACTIONS, SEDIMENTATION
Ionescu, Gabriela. A critical analysis of emissions and atmospheric dispersion of pollutants from plants for the treatment of residual municipal solid waste / G. Ionescu [et al.]. - P.227–240. - Bibliography is at the end of the article
Інші автори: Zardi D., Tirler W., Rada E. C., Ragazzi M.
Кл.слова: DISPERSION, HUMAN HEALTH, METEOROLOGY
Torreta, Vincenzo. Some consideration on particulate generated by traffic / V. Torreta, E. C. Rada, V. Panaitescu. - P.241–248. - Bibliography is at the end of the article
Кл.слова: ENGINES, VEHICLES, POLLUTION
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

10.


   
    Использование вихретокового дефектоскопа ВД 3-81 "EDDYCON" для эксплуатационного контроля узлов самолетов фирмы "БОИНГ" [Текст] = In-service Inspection of Aircraft Blocks Using Eddy Current Flaw Detector VD 3-81 "EDDYCON" : обмен опытом / В. Н. Учанин [и др.] // В мире неразрушающего контроля. - 2012. - № 4. - С. 61-64 : ил. - (Вихретоковый контроль). - Библиогр.: с. 64 (4 назв.) . - ISSN 1609-3178
УДК
ББК 30.10 + 22.336

Рубрики: Техника

   Метрология


   Физика


   Электромагнитные колебания


Кл.слова (ненормовані):
фирмы -- самолеты -- боинги -- boeing -- узлы самолетов -- контроль узлов самолетов -- эксплуатационный контроль -- дефектоскопы -- вихретоковые дефектоскопы -- вд 3-81 eddycon -- использование вихретоковых дефектоскопов -- вихретоковые преобразователи
Анотація: Рассмотрены примеры реализации методик контроля фирмы "Боинг" с помощью нового вихретокового дефектоскопа ВД 3-81 "EDDYCON" и специально разработанных вихретоковых преобразователей.
Дод.точки доступу:
Учанин, Валентин Николаевич (кандидат технических наук)
Джаганян, Арсен Владимирович
Опанасенко, Антон Валерьевич
Калинин, Андрей Викторович
фирма "Боинг"
"Боинг", фирма
"Boeing", фирма
фирма "Boeing"

Примірників усього: 1
чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі

11.


   
    Фильтрационное рафинирование магниевого сплава МЛ5 для авиационных отливок [Текст] = Filtration Refining of ML5 Magnesium Alloy for Aircraft Castings / В. В. Лукинов [и др.] // Литейное производство. - 2013. - № 1. - С. 22-25 : рис., табл. . - ISSN 0024-449X
УДК
ББК 34.61

Рубрики: Машиностроение

   Литейное производство


Кл.слова (ненормовані):
магниевые сплавы -- фильтрационные материалы -- огнеупорные материалы -- графит -- магнезит -- известняк
Анотація: Исследованы структура и свойства литого магниевого сплава МЛ5 при фильтрации его через углеродсодержащие материалы.
Дод.точки доступу:
Лукинов, Владимир Васильевич
Яресько, Константин Иванович
Шаломеев, Вадим Анатольевич (доктор технических наук)
Цивирко, Эдуард Иванович (доктор технических наук)
Внуков, Юрий Николаевич (доктор технических наук)

Примірників усього: 1
чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі

12.
Шифр: S959205/2013/75/3
   

Scientific bulletin [Text]. Ser. D, Mechanical Engineering. - Bucharest : Politehnica Press, 1929 - . - ISSN 1454-2358. - Виходить кожного кварталу
2013р. т.75 N 3 . - 89.00, грн
Зміст:
Staicu, Stefan. Kinematics of the spatial 3-UPU parallel robot / S. Staicu, C. Popa. - P.9–18. - Bibliography is at the end of the article
Кл.слова: PARALLEL ARCHITECTURES, RECURSIVE MATRIX METHOD, MANIPULATORS
Cristea, Aurora Felicia. The simulation of vibration attenuation in the hand-arm sistem / A. F. Cristea, R. Morariu-Gligor. - P.19–30. - Bibliography is at the end of the article
Кл.слова: PROFESSIONAL DISEASES, DAMPERS, MECHANICAL VIBRATIONS
Predoiu, Ion. Active flutter suppression of a 3D-wing: preliminary design and assessment. Part II – assessment of system performances / I. Predoiu, C. Berbente. - P.31–42. - Bibliography is at the end of the article
Кл.слова: DYNAMICS, LOADINGS, NUMERICAL SIMULATIONS
Stanciu, Virgil. The centrifugal compressors surge simulation / V. Stanciu, E. Popovici. - P.43–58. - Bibliography is at the end of the article
Кл.слова: COMPRESSION SYSTEMS, SURGE PROBLEMS, AERODYNAMICAL PHENOMENA
Nită, Mihaela. From preliminary aircraft cabin design to cabin optimization. Part I / M. Nită, D. Scholz. - P.59–72. - Bibliography is at the end of the article
Кл.слова: EVOLUTIONARY ALGORITHMS, FUSELAGE, AIRCRAFT DESING
Popescu, Jeni. Experimental setup for gas turbines operating on alternative gas fuels / J. Popescu [et al.]. - P.73–84. - Bibliography is at the end of the article
Інші автори: Stanciu V., Vilag V., Cuciumita C.
Кл.слова: RENEWABLE FUELS, NATURAL GAS, PERFORMANCES
Tudor, Alexandru. The influence of several parameters on the performance of earth to air heat exchangers in South-Eastern european climates / A. Tudor, V. Badescu. - P.85–96. - Bibliography is at the end of the article
Кл.слова: SIMULATIONS, HEATING, COOLING
Niculae, Gheorghe. On the possibility to recover the decrease of the spark ignition engines output at liquified petroleum gas fueling / G. Niculae, R. Chiriac. - P.97–110. - Bibliography is at the end of the article
Кл.слова: DUAL FUELING, HYDROGEN, PERFORMANCE
Pantile, Victor. Improvement of the performance of a spark ignition engine by using hydrogen / V. Pantile, C. Pana, N. Negurescu. - P.111–120. - Bibliography is at the end of the article
Кл.слова: EMISSIONS, INTERNAL COMBUSTION ENGINES, EXPERIMENTAL RESEARCH
Vakili-Tahami, Farid. The effect of ceramic volume fraction on the shakedown threshold pressure of FGM spheres / F. Vakili-Tahami, M. Zehsaz, M. -A. Saeimi-Sadigh. - P.121–130. - Bibliography is at the end of the article
Кл.слова: STRUCTURAL COMPONENTS, FINITE ELEMENTS METHOD, PRESSURE
Najjari, Vadoud. Modeling of dependence structures in meteorological data via Archimedean copulas / V. Najjari, H. Bal, S. Çelebioğlu. - P.131–138. - Bibliography is at the end of the article
Кл.слова: NONPARAMETRIC APPROACH, TEMPERATURE, GENERATORS
Mitroi, Marius Alexandru. A new generation of speed governors for Kaplan turbines / M. Al. Mitroi [et al.]. - P.139–150. - Bibliography is at the end of the article
Інші автори: Vasiliu D., Vasiliu N., Puhalschi R., Călinoiu C.
Кл.слова: HYDRAULIC TURBINES, DIGITAL CONTROLLERS, INDUSTRIAL COMPUTERS
Cioranu, Stefan Ion. Different strategies for MSW management in two Romanian cities: SC versus bio-drying / S. I. Cioranu, A. Bade. - P.151–158. - Bibliography is at the end of the article
Кл.слова: INCINERATION, SOLID WASTE, RECYCLING
Iatan, Elena. Numerical modeling the diminution of tranverse section of a sewer pipe for sediments transported as bed load / E. Iatan, R. M. Damian. - P.159–168. - Bibliography is at the end of the article
Кл.слова: ROUGHNESS COEFFICIENT, FINITE DIFFERENCES, MATLAB
Mocanu, Cătălina Raluca. Wastewater pretreatment in the sewage system / C. R. Mocanu. - P.169–176. - Bibliography is at the end of the article
Кл.слова: AERATION, WASTEWATER, OXYGEN
Popa, Constantin. Clean water mist technology used to suppress ethanol pool fires. Experimental study / C. Popa, A. Chisacof, V. Panaitescu. - P.177–188. - Bibliography is at the end of the article
Кл.слова: FIRE SAFETY, ECOLOGICAL FUEL, WATER DROPLES
Budea, Sanda. Increasing the efficiency energy for groups of pumps in cascade with performance automation. Experimental researches / S. Budea, F. Oprescu, P. Berbec. - P.189–198. - Bibliography is at the end of the article
Кл.слова: AUTOMATIC CONTROL, EFFICIENCY ENERGY, ENERGY SAVING
Zlatanovici, Dan. Assessment of the electric hydrogenerator stator insulation conditionby means of on-line partial discharge measurement / D. Zlatanovici, S. Dumitrescu. - P.199–210. - Bibliography is at the end of the article
Кл.слова: EVALUATION, IONIZATIONS, STATOR WINDING
Borbáth, Tünde. Experiments on viscous heating in leakage-free rotating seal systems with magnetic nanofluid / T. Borbáth [et al.]. - P.213–224. - Bibliography is at the end of the article
Інші автори: Panaitescu V. N., Borbáth I., Marinica O., Vékás L.
Кл.слова: BREAKAWAY TORQUE, SMART MATERIALS, MAGNETIC FLUIDS
Băran, Nicolae. Influence of the architecture of fine bubble generators on the variation of the concentration of oxygen dissolved in water / N. Băran, I. M. Căluşaru, G. Mateescu. - P.225–236. - Bibliography is at the end of the article
Кл.слова: OXYGENATION PROCESS, AIR PRESSURE, AIR FLOW
Iacob, Irinel Daniela. Dam’s risk management / I. D. Iacob. - P.237–246. - Bibliography is at the end of the article
Кл.слова: MONITORING, RESERVOIRS, INTEGRATED SYSTEMS
Purece, Cristian. Hydro turbine flow measurement by the Gibson method (time – pressure) / C. Purece [et al.]. - P.247–256. - Bibliography is at the end of the article
Інші автори: Zlatanovici R., Dumitrescu S., Cicirone C.
Кл.слова: WATER HAMMERS, HYDROPOWER PLANTS, EFFICIENCY
Voicu, Gheorghe. Miscanthus stalk behavior at shear cutting with v cutting blades, at different edge angles / G. Voicu, G. Moiceanu, G. Paraschiv. - P.257–270. - Bibliography is at the end of the article
Кл.слова: CUTTING KNIVES, DEFORMATION, TECHNOLOGICAL PROCESSES
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

13.
Шифр: S959205/2013/75/4
   

Scientific bulletin [Text]. Ser. D, Mechanical Engineering. - Bucharest : Politehnica Press, 1929 - . - ISSN 1454-2358. - Виходить кожного кварталу
2013р. т.75 N 4 . - 89.00, грн
Зміст:
Szasz, Bianca. Numerical study of compressible flow past a reentry vehicle nose / B. Szasz. - P.3–12. - Bibliography is at the end of the article
Кл.слова: FLUID DYNAMICS, SOFTWARE, SPECIFIC HEAT
Farzaneh-Gord, Mahmood. Optimizing reciprocating air compressors design parameters based on first law analysis / M. Farzaneh-Gord, A. Niazmand, M. Deymi-Dashtebayaz. - P.13–26. - Bibliography is at the end of the article
Кл.слова: THERMODYNAMIC, MODELING, ENERGY EQUIPMENTS
Nită, Mihaela. From preliminary aircraft cabin design to cabin optimization. Part II / M. Nită, D. Scholz. - P.27–46. - Bibliography is at the end of the article
Кл.слова: EVOLUTIONARY ALGORITHMS, OBJECTIVE FUNCTIONS, FUSELAGE
Andrei, Cristian. The impact of bulk cargoes liquefaction on ship’s intact stability / C. Andrei, Pazara Hanzu. - P.47–58. - Bibliography is at the end of the article
Кл.слова: STABILITY, HEELINGE, BULK CARGOES
Stoicescu, Aurel P. On the optimization of an Ackermann steering linkage / A. P. Stoicescu. - P.59–70. - Bibliography is at the end of the article
Кл.слова: MECHANISMS, OPTIMIZATION, STEERING
Zehsaz, Mohamad. The effects of friction coefficient and interference on the fretting fatigue strength of railway axle assembly / M. Zehsaz, P. Shahriary. - P.71–84. - Bibliography is at the end of the article
Кл.слова: RAILWAY TRANSPORTS, SIMULATION, FINITE ELEMENT METHOD
Sebesan, Ioan. Experimental study on determination of aerodynamic resistance to progress for electric locomotive LE 060 EA1 OF 5100 KW / I. Sebesan, S. Arsene, C. Stoica. - P.85–96. - Bibliography is at the end of the article
Кл.слова: AERODYNAMICE, MODELING, TRACTION FORCE
Ceacaru, Mihai Cristi. Large scale implementation of active solar systems integrated in passive buildings. Possible method to achieve the targets of the romanian energy strategy / M. C. Ceacaru, V. Badescu. - P.97–110. - Bibliography is at the end of the article
Кл.слова: ENERGY SYSTEMS, CIRCULATION PUMPS, THERMAL ENERGY
Untea, George Adrian. Energy and exergy analysis of an ejector refrigeration system / G. A. Untea [et al.]. - P.111–126. - Bibliography is at the end of the article
Інші автори: Dobrovicescu Al., Grosu L., Mladin E. C.
Кл.слова: PERFORMANCE, WORKING FLUIDS, WATER
Rusu, Eugen. Experimental study of a spark ignition engine fueled with gasoline and hydrogen in addition / E. Rusu, C. Pana, N. Neguresc. - P.127–136. - Bibliography is at the end of the article
Кл.слова: COMBUSTION, EMISSIONS, THERMAL EFFICIENCY
Zehsaz, Mohammad. Re-orientation of orthotropic axes in sheet metal using a developed method based on a simple semi geometrical model / M. Zehsaz, H. Mahdipour, A. A. Mohammadi. - P.137–148. - Bibliography is at the end of the article
Кл.слова: ANISOTROPIC PLASTICITY, MODELING, TENSION LOADING
Mîţiu, Mihaela. Dynamic response control for a mass-spring-viscous damper system by use of an additional electro-mechanical impedance / M. Mîţiu, D. Comeagă. - P.150–162. - Bibliography is at the end of the article
Кл.слова: DYNAMIC ABSORBERS, DYNAMIC CONTROL, MECHANICAL SYSTEMS
Visan, Dana Codruta. Modelisation du comportement dynamique d'une poutre avec une fissure fine / D. C. Visan, I. Părăusanu. - P.163–172. - Bibliography is at the end of the article
Кл.слова: DÉFORMATIONS, EQUATIONS MATHIEU, SIMULATION NUMÉRIQUE
Ilie, Cristinel. Sensory analysis for a new dynamic balancing system based on magnetic interaction / C. Ilie, D. Comeaga, O. Dontu. - P.173–184. - Bibliography is at the end of the article
Кл.слова: MODELING, TRANSDUCERS, MEASURING
Babis, Claudiu. Researches on the Impact of welding on the fatigue life / C. Babis, C. Oana, D. Dobrota. - P.185–196. - Bibliography is at the end of the article
Кл.слова: VARIABLE STRESSES, DURABILITY CURVES, MANUFACTURING PROCESS
Saruhan, Hamit. The effect of full annular rub on the rotating machinery system considering different rub materials and shaft running speeds / H. Saruhan, S. Saridemir, Ö. Erkan. - P.197–209. - Bibliography is at the end of the article
Кл.слова: VIBRATION SPECTRUMS, BEARINGS, ROTATING MACHINERYS
Olteanu, Elena Luminita. Determination of power consumption in milling / E. L. Olteanu, C. F. Bîsu, I. Tănase. - P.211–220. - Bibliography is at the end of the article
Кл.слова: CUTTING POWER, MECHANICAL ACTIONS, CUTTING PROCESS
Torretta, Vincenzo. Application of strategies for particulate matter reduction in urban areas: an Italian case / V. Torretta [et al.]. - P.221–228. - Bibliography is at the end of the article
Інші автори: Raboni M., Copelli S., Rada E. C., Ragazzi M., Ionescu G., Apostol T., Badea A.
Кл.слова: ATMOSPHERIC POLLUTION, HEATING, ROAD TRAFFIC
Ganziuc, Alexandru. Using digital electrohydraulic servo valves in fluid control systems / A. Ganziuc [et al.]. - P.229–238. - Bibliography is at the end of the article
Інші автори: Vasiliu N., Puhalschi R., Feher S.
Кл.слова: CONTROLLERS, DIGITAL COMMUNICATIONS, DIGITAL NETWORKS
Pietreanu, Costel-Marian. Researches regarding using sprinkler and watermist fire suppression systems in closed car parking spaces / C. -M. Pietreanu, C. Popa, V. Panaitescu. - P.239–246. - Bibliography is at the end of the article
Кл.слова: WATERMIST, TEMPERATURE, FIREFIGHTING SYSTEMS
Netcu, Cătălin. Experimental studies concerning water mist fire suppression in ventilated closed spaces / C. Netcu [et al.]. - P.247–252. - Bibliography is at the end of the article
Інші автори: Popa C., Panaitescu V., Anghel I.
Кл.слова: FIRE SUPPRESSION EFFICIENCY, WATER DROPLES, EVAPORATING
Castagna, Antonio. 3R’s from citizen point of view and their proposal from a case-study / A. Castagna [et al.]. - P.253–264. - Bibliography is at the end of the article
Інші автори: Casagrande M., Zeni A., Girelli E., Rada E. C., Ragazzi M., Apostol T.
Кл.слова: MUNICIPAL SOLID WASTE, RECYCLING, AIR QUALITY
Voicu, Gheorghe. Some mechanical characteristics of wheat seeds obtained by uniaxial compression tests / Gh. Voicu [et al.]. - P.265–278. - Bibliography is at the end of the article
Інші автори: Tudosie (Stefan) E.-M., Ungureanu N., Constantin G.-Al.
Кл.слова: CRUSHING, ENERGY ABSORBED, ELASTICAL DEFORMATION
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

14.
Шифр: U157641/2013/75/3
   

Scientific bulletin [Text]. Ser. C, Electrical Engineering and Computer Science. - Bucharest : Politehnica Press, 1929 - . - ISSN 1454-234x. - Виходить кожного кварталу
2013р. т.75 N 3 . - 97.00, грн
Зміст:
Morar, A. CT image processing in hip arthroplasty / A. Morar [and etc.]. - P.3-14. - Bibliography is at the end of the article
Інші автори: Moldoveanu F., Moldoveanu A., Asavei V., Egner A.
Кл.слова: BONE RECONSTRUCTION, SEGMENTATION, DYSFUNCTIONAL PARTS
Georgescu, O. Reducing false positives by marking and overclassifying / O. Georgescu. - P.15-26. - Bibliography is at the end of the article
Кл.слова: DETECTION, FINDING ADDITIONAL CONDITIONS, CORRECTNESS
Giumale, C. Model checking with fluid qualities / C. Giumale, M. Muraru. - P.27-42. - Bibliography is at the end of the article
Кл.слова: EVOLUTION GRAPH, COMPLEXITY, COMPUTATIONAL ASPECTS
Sankar, P. Modified Virtual Clock scheduling algorithm for queue management / P. Sankar, C. Chellamuthu. - P.43-54. - Bibliography is at the end of the article
Кл.слова: APPLICATIONS, DIFFERENT NECESSITIES, HROUGHPUT
Constantin, I. –C. Modern solutions for protecting the power system transformers of the transmission networks / I. –C. Constantin, C. Constantin, S. S. Iliescu. - P.55-62. - Bibliography is at the end of the article
Кл.слова: NUMERICAL TECHNOLOGY, CONTROL, FAULTS CLEARANCE
Ionescu, B. Classification of animated video genre using color and temporal information / B. Ionescu, P. Lambert. - P.63-74. - Bibliography is at the end of the article
Кл.слова: ACTION CONTENT, PROPERTIES, EFFICIENCY
Condorovici, R. G. Artistic genre classification for digitized painting collections / R. G. Condorovici, C. Vertan, L. Florea. - P.75-86. - Bibliography is at the end of the article
Кл.слова: AUTOMATIC DIGITAL IMAGE, UNTRAINED USER, DEVELOPED SYSTEM
Neghină, E. –C. Neural and Ant Colony Optimization versus statistical models for supervised classification of multispectral remote–sensing imagery / E. –C. Neghină [and etc.]. - P.87-100. - Bibliography is at the end of the article
Інші автори: Neagoe V.–E., Stoica R.–M., Ciotec A. D.
Кл.слова: COMPUTATIONAL INTELLIGENCE, BENCHMARKING, ASSESSMENT
Moleavin, V. Automated constraints generation for hardware synthesis in functional–thermal simulations / V. Moleavin [and etc.]. - P.101-108. - Bibliography is at the end of the article
Інші автори: Profirescu O.–G., Joita A., Profirescu M.
Кл.слова: TIME OPTIMIZATION, MAKING CIRCUITS, MIXED MODELING
Mocofan, A. Urban traffic control systems specifics and architectures / A. Mocofan, R. Ghiţă, I. Băţroş. - P.109-120. - Bibliography is at the end of the article
Кл.слова: PLANNING, STARTING PLATFORM, IMPLEMENTING PROCESS
Olteanu, M. Specific absorption rate redistribution and amplification in the presence of metallic walls and enclosures / M. Olteanu. - P.121-130. - Bibliography is at the end of the article
Кл.слова: ELECTROMAGNETIC RADIATION, ANATOMICAL MODELING, MOBILE PHONE
Bergoug, N. Numerical modelling of the coupling electromagnetic–hydrodynamic equations of an annular induction MHD pump / N. Bergoug, F. Z. Kadid, R. Abdessemed. - P.131-142. - Bibliography is at the end of the article
Кл.слова: CHANNEL, MAXWELL EQUATIONS, FINITE VOLUME METHOD
Shojaeian, S. Low frequency oscillations damping of a two–area multi–machine power system, including UPFC, using a hybrid emotional intelligent controller / S. Shojaeian, J. Soltani, G. A. Markadeh. - P.143-156. - Bibliography is at the end of the article
Кл.слова: RESEARCH, PROCESSING MECHANISM , PHASE SYMMETRICAL FAULT
Marin, A. Hybrid switching in a direct current circuit / A. Marin, M. O. Popescu. - P.157-170. - Bibliography is at the end of the article
Кл.слова: SIMULATION, ELECTRICAL CIRCUITS, BREAKER
Vihacencu, M. S. Experimental study of electrical properties of mineral and vegetable transformer oils / M. S. Vihacencu, A. Ciuriuc, L. M. Dumitran. - P.171-182. - Bibliography is at the end of the article
Кл.слова: FLOW ELECTRIFICATION PHENOMENON, SPINNING DISK SYSTEM, SAMPLES
Edu, I. R. A redundant aircraft attitude system based on miniaturised gyro clusters data fusion by using Kalman filtering / I. R. Edu [and etc.]. - P.183-198. - Bibliography is at the end of the article
Інші автори: Grigorie T. L., Enache A.–C., Ancuţa F., Cepişcă C.
Кл.слова: EXPERIMENTAL VALIDATION, IMPACT, DATA FUSION ALGORITHM
Catrinoiu, M. Matlab/Simulink model of a system for determining the angle of internal synchronous generators / M. Catrinoiu. - P.199-208. - Bibliography is at the end of the article
Кл.слова: ELECTRICAL CHARGE, LOAD ANGLE, OPERATION CONDITIONS
Patrascu, R. Analysis of energy efficiency of external recuperation of heat from flue gasses from industrial processes / R. Patrascu, E. Minciuc. - P.209-220. - Bibliography is at the end of the article
Кл.слова: SECONDARY ENERGY RESOURCES, ENVIRONMENT, ECONOMIC ASPECT
Ionescu, C. Numerical study on thermal depletion of the ground around a geothermal heat pump’s probe / C. Ionescu, C. Montange. - P.221-228. - Bibliography is at the end of the article
Кл.слова: LONG TERM, HEATING MODE, PERFORMANCE
Toma, R. Sequential determination of Americium, Plutonium and Uranium in liquid effluents from nuclear power plants / R. Toma, C. Dulama, I. Prisecaru. - P.229-238. - Bibliography is at the end of the article
Кл.слова: ACTINIDES, SEPARATION, VALIDATION
Vlad, G. –E. Simulation of an air heating/cooling system that uses the ground thermal potential and heat recovery / G. –E. Vlad [and etc.]. - P.239-246. - Bibliography is at the end of the article
Інші автори: Ionescu C., Necula H., Badea A.
Кл.слова: MECHANICAL, PASSIVE HOUSE STANDARDS, DECREASE POLLUTION
Mîşlea, D. –S. Green electricity in Romania developments and challenges / D. –S. Mîşlea, A. Leca. - P.247-256. - Bibliography is at the end of the article
Кл.слова: SUPPORT SCHEME, RENEWABLE ENERGY, ASSESSMENT
Voicu, P. The influence of biomass price over discounted net income / P. Voicu, V. Athanasovici. - P.257-264. - Bibliography is at the end of the article
Кл.слова: COGENERATION, ANALYSIS, PRIMARY ENERGY
Lazaroiu, G. C. Experimental harmonic analysis and distortion factor proposal for wind generation / G. C. Lazaroiu, R. Porumb, M. Roscia. - P.265-276. - Bibliography is at the end of the article
Кл.слова: WIND FARMS, POWER QUALITY, CURRENT GENERATOR
Croitoru, A. –M. Water cooling of photovoltaic panels from passive house located inside the University Politehnica of Bucharest / A. –M. Croitoru, A. Badea. - P.277-290. - Bibliography is at the end of the article
Кл.слова: THERMAL EFFICIENCY, NOMINAL POWER, SOLAR CELLS
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

15.
Шифр: S959205/2015/77/2
   

Scientific bulletin [Text]. Ser. D, Mechanical Engineering. - Bucharest : Politehnica Press, 1929 - . - ISSN 1454-2358. - Виходить кожного кварталу
2015р. т.77 N 2 . - 92.00, грн
Зміст:
Mosnegutu, V. A dynamic system governed by Sommerfeld effect / V. Mosnegutu [end etc.]. - P.3-18. - Bibliography is at the end of the article
Інші автори: Munteanu L., Chiroiu V., Stirbu C.
Кл.слова: ХАОТИЧНА ПОВЕДІНКА, ЕФЕКТ ЗОММЕРФЕЛЬДА, НЕІДЕАЛЬНА СИСТЕМА
Pang, S. Research on mechanical structures for vibration energy harvesting / S. Pang, J. Kan, W. Li. - P.19-26. - Bibliography is at the end of the article
Кл.слова: ВІБРАЦІЯ, НИЗЬКА ЧАСТОТА, ЕЛЕКТРИЧНИЙ ІНТЕРФЕЙС
Baldovin, S. The semi–active groundhook control of sdof systems with harmonical base excitation / S. Baldovin, D. Baldovin. - P.27-34. - Bibliography is at the end of the article
Кл.слова: КРЮК, СИСТЕМА, СИНУСОЇДАЛЬНЕ ЗБУДЖЕННЯ
Predescu, L. On the kinematics of the scorbot ER–VII robot / L. Predescu, I. Stroe. - P.35-46. - Bibliography is at the end of the article
Кл.слова: РОБОТ, КІНЕМАТИЧНА МОДЕЛЬ, ПЛАНУВАННЯ ШЛЯХУ
Radu, S. Comparison of FDI methods applied on nanosatellites with actuators failures / S. Radu, C. I. Cherciu, A.-M. Stoica. - P.47-58. - Bibliography is at the end of the article
Кл.слова: СИСТЕМА ВИЯВЛЕННЯ ТА УСУНЕННЯ НЕСПРАВНОСТЕЙ, МЕТОД НЕЙРОННОЇ МЕРЕЖІ, СЦЕНАРІЇ ВІДМОВИ
Sepcu, L. Controllability and longitudinal movement stability of an insect–type micro air vehicle / L. Sepcu [end etc.]. - P.59-70. - Bibliography is at the end of the article
Інші автори: Negrea P., Lungu M., Lungu R.
Кл.слова: ВЛАСНІ ЗНАЧЕННЯ, СТІЙКІСТЬ, КЕРОВАНІСТЬ
Dobrescu, B. Stability augmentation systems for jet trainer aircraft / B. Dobrescu. - P.71-82. - Bibliography is at the end of the article
Кл.слова: АМОРТИЗАЦІЯ, ГОЛЛАНДСЬКИЙ КРЕН, СИСТЕМИ
Andrei, C. A proposed criterion for assessment the pure loss of stability of ships in longitudinal waves / C. Andrei, M. D. Lamba, R. H. Pazara. - P.83-96. - Bibliography is at the end of the article
Кл.слова: ЧИСТА ВТРАТА СТІЙКОСТІ, ХВИЛІ, КРИТЕРІЙ
Oprea, R. A. On the modeling of dry friction dampers in vehicles suspensions / R. A. Oprea, M. Mihailescu. - P.97-108. - Bibliography is at the end of the article
Кл.слова: ВЕРТИКАЛЬНІ КОЛИВАННЯ, РОЗРИВНІ СИСТЕМИ, СУХЕ ТЕРТЯ
Zhang, S. Suppression control of positioning noise for dual stage with coupling damper / S. Zhang, L. Wang. - P.109-120. - Bibliography is at the end of the article
Кл.слова: ДЕМПФЕР ЗЧЕПЛЕННЯ, НАСИЧЕНІСТЬ ХОДУ, ШУМ ПОЗИЦІОНУВАННЯ
Nutu, N. C. Experimental researches of using LPG as a fuel for a car diesel engine / N. C. Nutu [end etc.]. - P.121-132. - Bibliography is at the end of the article
Інші автори: Pana C., Dobre A., Negurescu N., Cernat A., Bondoc I. D.
Кл.слова: ГОРІННЯ, ЗАБРУДНЮЮЧІ РЕЧОВИНИ, ПАЛИВО
Teodosiu, C. Etude numerique d’un jet turbulent tridimensionnel horizontal de paroi / C. Teodosiu, G. Rusaouen, R. Teodosiu. - P.133-144. - Bibliography is at the end of the article
Кл.слова: ЦИФРОВА МОДЕЛЬ, МОДЕЛЬ ТУРБУЛЕНТНОСТІ, РЕАКТИВНИЙ ЛІТАК
Ioana, U. Experimental and theoretical thermal comfort analyses in higher education buildings in Bucharest / U. Ioana [end etc.]. - P.145-156. - Bibliography is at the end of the article
Інші автори: Croitoru C., Nastase I., Crutescu R., Badescu V.
Кл.слова: ТЕПЛОВИЙ КОМФОРТ, АУДИТОРІЯ УНІВЕРСИТЕТУ, ПРОГРАМНЕ ЗАБЕЗПЕЧЕННЯ
Bhattacharya, P. A numerical study of laminar natural convective heat transfer inside a closed cavity with different aspect ratio / P. Bhattacharya, S. Das. - P.157-166. - Bibliography is at the end of the article
Кл.слова: ПРИРОДНА КОНВЕКЦІЯ, КОЕФІЦІЄНТ ТЕПЛОПЕРЕДАЧІ, СПІВВІДНОШЕННЯ СТОРІН
Abaza, B. Conception d’une innovation – systeme pour controler les fonctions d’un vehicule a distance / B. Abaza [end etc.]. - P.167-178. - Bibliography is at the end of the article
Інші автори: Spiroiu M., Stanciu C., Serban D., Plutasu I., Ghencea R., Popa A., Galitu E.
Кл.слова: ІННОВАЦІЇ, СМАРТФОН, МАРКЕТИНГОВА СТРАТЕГІЯ
Poenaru, E. Considerations on designing an experimental drug dispenser / E. Poenaru, C. A. Micu, C. Poenaru. - P.179-193. - Bibliography is at the end of the article
Кл.слова: ДОТРИМАННЯ РЕЖИМУ ЛІКУВАННЯ, ХРОНІЧНІ ЗАХВОРЮВАННЯ, ПРЕПАРАТИ
Madic, M. Ranking of some most commonly used non-traditional machining processes using ROV and critic methods / M. Madic, M. Radovanovic. - P.193-204. - Bibliography is at the end of the article
Кл.слова: НЕТРАДИЦІЙНІ ПРОЦЕСИ ОБРОБКИ, БАГАТОКРИТЕРІАЛЬНЕ ПРИЙНЯТТЯ РІШЕНЬ, РЕЙТИНГ
Horvath, R. The examination of surface roughness parameters in the fine turning of hypereutectic aluminium alloys / R. Horvath, A. Dregelyi-Kiss, G. Matyasi. - P.205-216. - Bibliography is at the end of the article
Кл.слова: ПЛАН ЕКСПЕРИМЕНТУ, ТОПОЛОГІЧНА КАРТА, ШОРСТКІСТЬ ПОВЕРХНІ
Chivu, O. -R. Preliminary research on the optimization of the reconditioning by welding technology of certain elements in the automotive industry / O.-R. Chivu [end etc.]. - P.217-224. - Bibliography is at the end of the article
Інші автори: Rontescu C., Cicic D.-T., Petriceanu C.
Кл.слова: РЕМОНТ, ЗВАРЮВАННЯ, КОЛІНЧАСТИЙ ВАЛ
Cucu, L. Modular design for storage of luggage in passenger trains / L. Cucu [end etc.]. - P.225-234. - Bibliography is at the end of the article
Інші автори: Simion I., Stoica G. F., Cananau S.
Кл.слова: МОДУЛЬНА КОНСТРУКЦІЯ, ЗБЕРІГАННЯ БАГАЖУ, ЕКЗОСКЕЛЕТ
Georgescu, S. -C. Pumping station scheduling for water distribution networks in EPANET / S.-C. Georgescu, A.-M. Georgescu. - P.235-246. - Bibliography is at the end of the article
Кл.слова: ПЛАНУВАННЯ НАСОСНОЇ СТАНЦІЇ, МОДЕЛЬ ШВИДКОСТІ, ШАБЛОН НАПОРУ
Piraianu, V. F. Development of a decision system support based on genetic algorithms for the optimal operation of hydroelectric power plants on the day ahead market / V. F. Piraianu [end etc.]. - P.247-256. - Bibliography is at the end of the article
Інші автори: Vasiliu N., Popa R., Piraianu C.
Кл.слова: ОПТИМІЗАЦІЯ, ГІДРОЕЛЕКТРОСТАНЦІЇ, ГЕНЕТИЧНІ АЛГОРИТМИ
Brignoli, M. Environmental impact of reservoir desilting operation / M. Brignoli [end etc.]. - P.257-270. - Bibliography is at the end of the article
Інші автори: Espa P., Quadroni S., Torretta V., Ionescu G.
Кл.слова: ЗМИВ, ЗАВИСЛІ РЕЧОВИНИ, ЗАМУЛЕННЯ ВОДОЙМИ
Codescu, S. Computational simulation of road tunnel fire protection, by using sprinklers / S. Codescu, D. Popescu, V. Panaitescu. - P.271-278. - Bibliography is at the end of the article
Кл.слова: МЕРЕЖА СПРИНКЛЕРІВ, КРАПЛІ ВОДИ, МОДЕЛЮВАННЯ ПОЖЕЖІ
Majumder, P. A deterministic inventory model with weibull deterioration rate under trade credit period in demand declining market and allowable shortage using fuzz / P. Majumder, U. K. Bera, M. Maiti. - P.279-292. - Bibliography is at the end of the article
Кл.слова: РОЗМІР ПАРТІЇ, ЗНИЖЕННЯ ПОПИТУ, КОМЕРЦІЙНИЙ КРЕДИТ
Turof, M. The optimization of port operation processes in order to decrease the risk of occurrence of work accidents / M. Turof, G. Solomon, G. Stoica. - P.293-308. - Bibliography is at the end of the article
Кл.слова: НЕЩАСНІ ВИПАДКИ НА ВИРОБНИЦТВІ, ТЕХНОЛОГІЧНИЙ ПРОЦЕС РОБОТИ ПОРТУ, ОЦІНКА РИЗИКІВ
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

16.
Шифр: I495445200/1977/oe-2/1
   

IEEE Jornal of Oceanic Engineering [Text]. - Нью-Йорк : IEEE, 1976 - . - ISSN 0364-9059. - Виходить кожного кварталу
1977р. oe-2 N 1 . - 30.00, грн
Зміст:
Swift, C. Preface - Special issue on radio oceanography / C. Swift. - P.1-3
Кл.слова: RADIO OCEANOGRAPHY
Trizna, D. Directional sea spectrum determination using HF Doppler radar techniques / D. Trizna [и др.]. - P.4-11
Інші автори: Moore J., Headrick J., Bogle R.
Кл.слова: DOPPLER RADAR TECHNIQUES, SEA SPECTRUM
Teague, C. Studies of the sea using HF radio scatter / C. Teague, G. Tyler, R. Stewart. - P.12-19
Кл.слова: RADIO SCATTER, STUDIES, SEA
Barrick, D. The statistics of HF sea-echo Doppler spectra / D. Barrick, J. Snider. - P.19-28
Кл.слова: SEA-ECHO DOPPLER SPECTRA, STATISTICS
Plant, W. Studies of backscattered sea return with a CW, dual-frequency, X-band radar / W. Plant. - P.28-36
Кл.слова: X-BAND RADAR, DUAL-FREQUENCY
Graf, K. Induced-current effects on microwave backscatter / K. Graf, D. Tremain, H. Guthart. - P.36-42
Кл.слова: MICROWAVE BACKSCATTER, INDUCED-CURRENT EFFECTS
Bass, F. Radiophysical investigations of sea roughness (radiooceanography) at the Ukrainian Academy of Sciences / F. Bass [и др.]. - P.43-52
Інші автори: Braude S., Fuks I., Kalmykov A., Megn A., Ostrovsky I., Rosenberg A.
Jones, W. Aircraft measurements of the microwave scattering signature of the ocean / W. Jones, L. Schroeder, J. Mitchell. - P.52-61
Кл.слова: OCEAN, MICROWAVE SCATTERING SIGNATURE, AIRCRAFT MEASUREMENTS
Hammond, D. Short pulse radar used to measure sea surface wind speed and SWH / D. Hammond, R. Mennella, E. Walsh. - P.61-67
Кл.слова: RADAR
Brown, G. The average impulse response of a rough surface and its applications / G. Brown. - P.67-74
Кл.слова: APPLICATIONS, ROUGH SURFACE, AVERAGE IMPULSE RESPONSE
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі

17.
Шифр: I078069842/1977/ap-25/1
   

IEEE Transactions on Antennas and Propagation [Text]. - Нью-Йорк : Institute of Electrical and Electronics Engineers, 1953 - . - ISSN 0018-926X. - Виходит раз на два місяця
1977р. ap-25 N 1 . - 30.00, грн
Зміст:
Swift, C. Preface: Special issue on radio oceanography / C. Swift. - P.1-3
Кл.слова: RADIO OCEANOGRAPHY
Trizna, D. Directional sea spectrum determination using HF Doppler radar techniques / D. Trizna [и др.]. - P.4-11
Інші автори: Moore J., Headrick J., Bogle R.
Кл.слова: RADAR DOPPLER, RADAR SPECTRUM
Teague, C. Studies of the sea using HF radio scatter / C. Teague, G. Tyler, R. Stewart. - P.12-19
Кл.слова: RADIO SCATTER, SEA USING
Barrick, D. The statistics of HF sea-echo Doppler spectra / D. Barrick, J. Snider. - P.19-28
Кл.слова: DOPPLER SPECTRA, DOPPLER POWER SPECTRUM
Plant, W. Studies of backscattered sea return with a CW, dual-frequency, X-band radar / W. Plant. - P.28-36
Кл.слова: X-BAND RADAR, DUAL-FREQUENCY, STUDIES
Graf, K. Induced-current effects on microwave backscatter / K. Graf, D. Tremain, H. Guthart. - P.36-42
Кл.слова: MICROWAVE BACKSCATTER, INDUCED-CURRENT EFFECTS
Bass, F. Radiophysical investigations of sea roughness (radiooceanography) at the Ukrainian Academy of Sciences / F. Bass [и др.]. - P.43-52
Інші автори: Braude S., Fuks I., Kalmykov A., Megn A., Ostrovsky I., Rosenberg A.
Кл.слова: UKRAINIAN ACADEMY OF SCIENCES, RADIOPHYSICAL INVESTIGATIONS, RADIOOCEANOGRAPHY
Jones, W. Aircraft measurements of the microwave scattering signature of the ocean / W. Jones, L. Schroeder, J. Mitchell. - P.52-61
Кл.слова: OCEAN, MICROWAVE SCATTERING SIGNATURE, AIRCRAFT MEASUREMENTS
Hammond, D. Short pulse radar used to measure sea surface wind speed and SWH / D. Hammond, R. Mennella, E. Walsh. - P.61-67
Кл.слова: RADAR
Brown, G. The average impulse response of a rough surface and its applications / G. Brown. - P.67-74
Кл.слова: APPLICATIONS, ROUGH SURFACE, AVERAGE IMPULSE RESPONSE
Weissman, D. Dual frequency correlation radar measurements of the height statistics of ocean waves / D. Weissman, J. Johnson. - P.74-83
Кл.слова: OCEAN WAVES, RADAR MEASUREMENTS
Elachi, C. Models of radar imaging of the ocean surface waves / C. Elachi, W. Brown. - P.84-95
Кл.слова: MODELS, RADAR IMAGING, OCEAN
Truman, W. Three-dimensional vector modeling and restoration of flat finite wave tank radiometric measurements / W. Truman, C. Balanis, J. Holmes. - P.95-104
Кл.слова: RADIOMETRIC MEASUREMENTS, VECTOR MODELING, RESTORATION
Klein, L. An improved model for the dielectric constant of sea water at microwave frequencies / L. Klein, C. Swift. - P.104-111
Кл.слова: MICROWAVE FREQUENCIES, IMPROVED MODEL, SEA WATER
Wilheit, T. Microwave radiometric determination of wind speed at the surface of the ocean during BESEX / T. Wilheit, M. Fowler. - P.111-120
Кл.слова: MICROWAVE RADIOMETRIC, OCEAN
Blume, H. -J. Radiometric observations of sea temperature at 2.65 GHz over the Chesapeake Bay / H. -J. Blume [и др.]. - P.121-128
Інші автори: Love A., Van Melle M., Ho W.
Кл.слова: RADIOMETRIC OBSERVATIONS, CHESAPEAKE BAY
Barnum, J. High-resolution mapping of oceanic wind fields with skywave radar / J. Barnum, J. Maresca, S. Serebreny. - P.128-132
Кл.слова: SKYWAVE RADAR, OCEANIC WIND FIELDS
Maresca, J. Measurement of oceanic wind speed from HF sea scatter by skywave radar / J. Maresca, J. Barnum. - P.132-136
Кл.слова: SKYWAVE RADAR, SEA SCATTER, MEASUREMENT
Leykin, I. Determination of space and time sea wave structure from frequency characteristics of the radio signal scattered by the sea / I. Leykin, I. Ostrovsky, A. Rosenberg. - P.136-140
Кл.слова: SEA, RADIO SIGNAL
Schuler, D. An experimental study of a pulse compression scatterometer system / D. Schuler. - P.140-145
Кл.слова: SCATTEROMETER SYSTEM, EXPERIMENTAL STUDY
Walsh, E. Problems inherent in using aircraft for radio oceanography studies / E. Walsh. - P.145-149
Кл.слова: RADIO OCEANOGRAPHY STUDIES, PROBLEMS INHERENT, AIRCRAFT
Elachi, C. Effects of random phase changes on the formation of synthetic aperture radar imagery / C. Elachi, D. Evans. - P.149-153
Кл.слова: RADAR IMAGERY, SYNTHETIC APERTURE
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі

18.
Шифр: Ж408371946/2017/4/1
   Журнал

Журнал інженерних наук [Текст] : наук. журн./ Сум. держ. ун-т. - Суми : СумДУ, 1994 - . - ISSN 2312-2498. - Періодичність z
2017р. т.4 N 1 . - 54.75, грн
Зміст:
Ivanov, V. O. Comprehensive analysis of the mechanical system “fixture – workpiece” / V. O. Ivanov, I. V. Pavlenko. - P.A 1-A 10
Кл.слова: СИЛА РЕЗАНИЯ, ВЫНУЖДЕННЫЕ КОЛЕБАНИЯ, СВОБОДНАЯ ЧАСТОТА
Krivosheya, A. V. Analysis of the gear tooth gearing by the module m = 2.625 mm of hydraulic pumps / A. V. Krivosheya, V. V. Voznyy, V. E. Melnyk. - P.A 11-A 15
Кл.слова: ШЕРОХОВАТОСТЬ, ЦИЛИНДРИЧЕСКИЕ ШЕСТЕРНИ, ЗУБЧАТАЯ ПЕРЕДАЧА
Vertepov, Yu. M. Investigation of fluid flow in the space of a liquid-ring vehicle / Yu. M. Vertepov. - P.B 1-B 5
Кл.слова: НАГНЕТАТЕЛЬНЫЕ ПОРТЫ, ВСАСЫВАЮЩИЕ ПОРТЫ, ВЕЛИЧИНА УГЛА
Lebedev, V. A. Analytical determination of the frequency of short circuits of the arc at surfacing in gas dioxide with welding pool mechanical oscillations / V. A. Lebedev, S. V. Novikov, S. A. Loy. - P.B 6-B 10
Кл.слова: РАЗБРЫЗГИВАНИЕ МЕТАЛЛА, КОРОТКОЕ ЗАМЫКАНИЕ, ПЕРИОДИЧЕСКОЕ ВОЗДЕЙСТВИЕ
Pilipenko, S. V. Analysis and development of the method for calculating calibration of the working plank in the cold tube roller rolling mills / S. V. Pilipenko, V. U. Grigorenko. - P.B 11-B 16
Кл.слова: ХОЛОДНАЯ ПИЛИГРИМОВАЯ ПРОКАТКА, СПЛАЙН-КРИВАЯ БЕЗЬЕ, КАЛИБРОВКА РАБОЧЕЙ ПЛАНКИ
Pavlenko, I. V. Investigation of critical frequencies of the centrifugal compressor rotor with taking into account stiffness of bearings and seals / I. V. Pavlenko [и др.]. - P.C 1-C 6
Інші автори: Simonovsky V. I., Pitel’ J., Verbovoy A. E., Demianenko M. N.
Pozovnyi, O. O. The impact of multi-gap seals on rotor dynamics / O. O. Pozovnyi, V. A. Martsynkovskyy. - P.C 7-C 12
Кл.слова: ЧАСТОТНАЯ ХАРАКТЕРИСТИКА, РОТОРЫ, ЦЕНТРОБЕЖНЫЙ НАСОС
Yushkevich, P. O. Report on laboratory research of power-efficient triple-nozzle tuyere oxygen lancing / P. O. Yushkevich, L. S. Molchanov. - P.E 1-E 7, КОМБИНИРОВАННАЯ ПРОДУВКА КИСЛОРОДОМ
Sytar, V. I. Polymeric compositional materials based on polycarbonate for units of devices for transform solar into thermal energy / V. I. Sytar [и др.]. - P.F 1-F 7
Інші автори: Sukhyy K. M., Kabat O. S., Nachovnyi I. I.
Кл.слова: ЭНЕРГОСБЕРЕГАЮЩЕЕ ОБОРУДОВАНИЕ, ПОЛИМЕРНАЯ МАТРИЦА, МОДИФИКАТОРЫ
Klimenko, S. A. Сontact stresses on the rake face of cutting tools with PCBN in turning of hardened steel / S. A. Klimenko [и др.]. - P.F 8-F 14
Інші автори: Klimenko S. An., Manokhin A. S., Mel’nichuk Yu. A., Kopіeikina M. Yu., Chumak A. O.
Кл.слова: ПОЛИКРИСТАЛЛИЧЕСКИЙ СВЕРХТВЕРДЫЙ КОМПОЗИТ, КУБИЧЕСКИЙ НИТРИД БОРА, РЕЖУЩИЕ ИНСТРУМЕНТЫ
Bibyk, M. V. Optimization of controlled damages on the recognition in the master education / M. V. Bibyk, A. S. Dovbysh. - P.H 1-H 6
Кл.слова: ИНФОРМАЦИОННО-ЭКСТРЕМАЛЬНЫЙ АЛГОРИТМ, СИСТЕМА ПОДДЕРЖКИ ПРИНЯТИЯ РЕШЕНИЙ, КОНТРОЛЬНЫЕ ДОПУСКИ
Korobko, A. I. Methodology for developing new test methods / A. I. Korobko. - P.H 7-H 13
Кл.слова: НЕЧЕТКАЯ КОГНИТИВНАЯ КАРТА, МЕТОД ТЕСТИРОВАНИЯ, ТЕОРИЯ ОГРАНИЧЕНИЙ
Bykov, M. M. Speech activity detection for the automated speaker recognition system of critical use / M. M. Bykov, V. V. Kovtun, O. O. Maksimov. - P.H 14-H 20
Кл.слова: СВЕРТОЧНАЯ НЕЙРОННАЯ СЕТЬ, ВЕЙВЛЕТ-ПРЕОБРАЗОВАНИЕ, АВТОМАТИЗИРОВАННАЯ СИСТЕМА РАСПОЗНАВАНИЯ ДИКТОРОВ
Nedilko, V. M. Analysis of the problem of forced landing of aircraft on water surface and methods of simulation of aircraft crews at aircraft accidents of this type / V. M. Nedilko, V. M. Stratonov. - P.H 21-H 25
Кл.слова: АВАРИИ, ТРЕНИРОВКА ЭКИПАЖА, ТРЕНАЖЕРЫ
Є примірники у відділах: всього 1 : чз.1 (1)
Вільні: чз.1 (1)

Знайти схожі
Перейти до описів статей

19.
Шифр: S959205/2017/79/4
   

Scientific bulletin [Text]. Ser. D, Mechanical Engineering. - Bucharest : Politehnica Press, 1929 - . - ISSN 1454-2358. - Виходить кожного кварталу
2017р. т.79 N 4 . - 167.00, грн
Зміст:
Ionel, A. Efficiency analysis of inflation envelope devices for upper–stages LEO deorbiting / A. Ionel. - P.3-14. - Bibliography is at the end of the article
Кл.слова: ІНФЛЯЦІЙНА ОБОЛОНКА, ЧИСЕЛЬНЕ МОДЕЛЮВАННЯ, ПРАВИЛА ПОМ'ЯКШЕННЯ
Wang, X. A target recognition method using orthogonal maximum margin criterion projection / X. Wang, S. Zhang, J. Me. - P.15-26. - Bibliography is at the end of the article
Кл.слова: КРИТЕРІЙ МАКСИМАЛЬНОЇ МАРЖІ, ВИТЯГ ФУНКЦІЙ, ПРОЕКЦІЯ
Necula, F. Critical analysis of risk assessment methods and models used in civil aviation / F. Necula. - P.27-38. - Bibliography is at the end of the article
Кл.слова: НАДІЙНІСТЬ, ОЦІНКА РИЗИКУ, РОЗПОДІЛ ЙМОВІРНОСТЕЙ
Zaharia, S. E. Deicing on ground optimizing process of aircraft’s / S. E. Zaharia, C. Dinu. - P.39-48. - Bibliography is at the end of the article
Кл.слова: ОБРОБКА, ВИДАЛЕННЯ ЗЛЕДЕНІННЯ, ОПТИМІЗАЦІЯ
Chelaru, T. -V. Mathematical model for micro launcher, performances evaluation / T.-V. Chelaru [end etc.]. - P.49-66. - Bibliography is at the end of the article
Інші автори: Onel A.-I., Afilipoae T. P., Neculaescu A.-M.
Кл.слова: МАТЕМАТИЧНА МОДЕЛЬ, ХАРАКТЕРИСТИКИ МІКРОПУСКОВОЇ УСТАНОВКИ, ВИВЕДЕННЯ
Tang, Y. Recycled aggregate concrete–filled steel column convex deformation detection via non–contact measurement / Y. Tang [end etc.]. - P.67-82. - Bibliography is at the end of the article
Інші автори: Li L., Feng W., Wang C., Zou X., Situ W.
Кл.слова: МОНОКУЛЯРНИЙ ЗІР, МУЛЬТИСЕНСОРНЕ ВИМІРЮВАННЯ, ХИТРИЙ АЛГОРИТМ
Aldhaidhawi, M. Ignition delay period for a compression ignition engine operating on diesel and biodiesel B20 / M. Aldhaidhawi [end etc.]. - P.83-94. - Bibliography is at the end of the article
Інші автори: Racovitza A., Chiriac R., Badescu V.
Кл.слова: БІОДИЗЕЛЬ, ДВИГУН ІЗ ЗАПАЛЮВАННЯМ ВІД СТИСНЕННЯ, ПЕРІОД ЗАТРИМКИ ЗАПАЛЮВАННЯ
Constantin, B. Vehicle architecture optimization for pedestrian protection using finite element analysis / B. Constantin, D. Iozsa, G. Fratila. - P.95-102. - Bibliography is at the end of the article
Кл.слова: ЗАХИСТ ПІШОХОДІВ, АРХІТЕКТУРА ТРАНСПОРТНОГО ЗАСОБУ, КІНЦЕВИЙ ЕЛЕМЕНТНИЙ АНАЛІЗ
Neculcea, A. Aspects on the capacity for double track lines with block system; compressed timetable / A. Neculcea. - P.103-122. - Bibliography is at the end of the article
Кл.слова: ВАНТАЖНІ КОРИДОРИ, МІСТКІСТЬ, СТИСЛИЙ РОЗКЛАД
Bouaziz, M. Numerical study of flow and heat transfer characteristics of backward–facing step using nanofluid / M. Bouaziz, L. Bouazizi, S. Turki. - P.123-136. - Bibliography is at the end of the article
Кл.слова: НАНОФЛЮЇД, ЗМІШАНА КОНВЕКЦІЯ, ВИШТОВХУВАЛЬНІ СИЛИ
Kumar, R. Meta–heuristic approach for multi–objective optimization of condensation heat transfer and pressure drop with twisted tape inserts / R. Kumar, P. Kumar. - P.137-146. - Bibliography is at the end of the article
Кл.слова: КОНДЕНСАЦІЯ, ТЕПЛООБМІН, ПАДІННЯ ТИСКУ
Li, F. -X. A study on development of steam generator for domestic steam cleane / F.-X. Li, Z.-Z. Li. - P.147-156. - Bibliography is at the end of the article
Кл.слова: ПАРОГЕНЕРАТОР, ТЕПЛОПЕРЕДАЧА, КОМП'ЮТЕРНИЙ АНАЛІЗ
Abidi, Y. Analyse de la correlation entre la rugosite et la vibration de coupe en usinage des aciers durcis / Y. Abidi, L. Boulanouar. - P.157-170. - Bibliography is at the end of the article
Кл.слова: ТВЕРДА ОБРОБКА, ЗАГАРТОВАНА СТАЛЬ, ШОРСТКІСТЬ
Venkateswarlu, M. Soret and heat source effects on MHD flow of a viscous fluid in a parallel porous plate channel in presence of slip condition / M. Venkateswarlu, M. P. Kumar. - P.171-186. - Bibliography is at the end of the article
Кл.слова: ПОРИСТЕ СЕРЕДОВИЩЕ, ДЖЕРЕЛО ТЕПЛА, ПАРАЛЕЛЬНИЙ ПЛАСТИНЧАСТИЙ КАНАЛ
Cukovic, S. A comparative study of CAD data exchange based on the step standard / S. Cukovic [end etc.]. - P.187-198. - Bibliography is at the end of the article
Інші автори: Devedzic G., Fiorentino M., Ghionea I., Anwer N., Qiao L., Rakonjac B.
Кл.слова: ОБМІН ДАНИМИ, СУМІСНІСТЬ, МАШИНОБУДУВАННЯ
Stanojkovic, J. Selection of drill for drilling with high pressure coolant using entropy and copras MCDM method / J. Stanojkovic, M. Radovanovic. - P.199-204. - Bibliography is at the end of the article
Кл.слова: БАГАТОКРИТЕРІАЛЬНЕ ПРИЙНЯТТЯ РІШЕНЬ, ТВЕРДОСПЛАВНЕ СВЕРДЛО, ЕНТРОПІЯ
Venkatachalam, G. Investigation on dynamic behaviour of sandwich panels made of aluminium and hybrid polymer and optimization of design parameters using Taguchi method / G. Venkatachalam [end etc.]. - P.205-214. - Bibliography is at the end of the article
Інші автори: Venu V., Vignesh P., Ghule K., Saluja J. S.
Кл.слова: ГІБРИДНИЙ ПОЛІМЕР, СЕНДВІЧ–ПАНЕЛІ, МОДАЛЬНИЙ АНАЛІЗ
Ma, J. Fault diagnosis of rolling bearing based on TKEO–ELM / J. Ma, J. Wu, X. Wang. - P.215-226. - Bibliography is at the end of the article
Кл.слова: ПІДШИПНИК КОЧЕННЯ, ЕНЕРГЕТИЧНИЙ ОПЕРАТОР, НЕЙРОННА МЕРЕЖА ЗВОРОТНОГО ПОШИРЕННЯ
Busaru, A. E. Experimental research on structural hardening of the maximum stressed crankshafts surfaces obtained by thermal spraying / A. E. Busaru [end etc.]. - P.227-238. - Bibliography is at the end of the article
Інші автори: Goran M., Gheta R. A., Dumitru G. M., Iacobescu G.
Кл.слова: МЕТАЛОГРАФІЧНЕ ОБСТЕЖЕННЯ, ВИПРОБУВАННЯ НА ТВЕРДІСТЬ, ЕЛЕКТРОДУГОВЕ НАПИЛЕННЯ МЕТАЛУ
Kebir, T. Simulation of the cyclic hardening behavior of aluminum alloys / T. Kebir [end etc.]. - P.239-250. - Bibliography is at the end of the article
Інші автори: Benguediab M., Miloudi A., Imad A.
Кл.слова: ЦИКЛІЧНЕ ЗМІЦНЕННЯ, КОНТРОЛЬОВАНА ПЛАСТИЧНА ДЕФОРМАЦІЯ, МАЛОЦИКЛОВА ВТОМА
Zhang, W. The complex stiffness method of damping for constrained damping structure with a stand–off layer / W. Zhang [end etc.]. - P.251-264. - Bibliography is at the end of the article
Інші автори: Sun D., Yan B., Li Z.
Кл.слова: ДЕМПФЕРНА СТРУКТУРА, МЕТОД КОМПЛЕКСНОЇ ЖОРСТКОСТІ, ВІДСТІЙНИЙ ШАР
Morosanu, A. -D. Interlaboratory comparison of a digital thermohygrometer in several Romanian laboratories / A.-D. Morosanu [end etc.]. - P.265-272. - Bibliography is at the end of the article
Інші автори: Dumitru G. M., Iacobescu G., Neagu D. M., Dinu C.
Кл.слова: МІЖЛАБОРАТОРНЕ ПОРІВНЯННЯ, ПІЛОТНА ЛАБОРАТОРІЯ, КАЛІБРУВАННЯ
Vuta, L. I. Modelling the degradation of organic matter in wastewater / L. I. Vuta, G. E. Dumitran, V. F. Piraianu. - P.273-282. - Bibliography is at the end of the article
Кл.слова: БІОРОЗКЛАДАНИЙ ОРГАНІЧНИЙ СУБСТРАТ, КІНЕТИКА БІОДЕГРАДАЦІЇ, МАТЕМАТИЧНЕ МОДЕЛЮВАННЯ
Ismail, A. H. Three–dimensional simulation of pollutant dispersion of an open channel flow with a side discharge / A. H. Ismail, D. Robescu. - P.283-294. - Bibliography is at the end of the article
Кл.слова: ОБЧИСЛЮВАЛЬНА ГІДРОДИНАМІКА, ДИСПЕРСІЯ ЗАБРУДНЮЮЧИХ РЕЧОВИН, РІЧКА ДУНАЙ
Boncescu, C. Air fractions impact over pressure drop in air–water mixture flow / C. Boncescu, D. Robescu. - P.295-304. - Bibliography is at the end of the article
Кл.слова: ПЕРЕПАД ТИСКУ, ЛІКТЬОВИЙ ЗГИН, ДІАФРАГМА
Vasiliu, G. C. Dynamics of the electrohydraulic servopumps for industrial open circuits / G. C. Vasiliu, D. Vasiliu, M. D. Bontos. - P.305-322. - Bibliography is at the end of the article
Кл.слова: МОДЕЛЮВАННЯ, СИМУЛЯЦІЯ, ЕКСПЕРИМЕНТАЛЬНА ІДЕНТИФІКАЦІЯ
Belet, T. Modeling the decision–making process in order to assess the risks of an IT&C project / T. Belet [end etc.]. - P.323-334. - Bibliography is at the end of the article
Інші автори: Purcarea A. A., Negoita O. D., Corocaescu M.
Кл.слова: ЗАЛУЧЕННЯ КОРИСТУВАЧІВ, СПЕЦИФІКАЦІЇ, ЖИТТЄВИЙ ЦИКЛ ПРОЕКТУ
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі
Перейти до описів статей

20.
Шифр: T932125638/1963/62/7
   

Transactions of the British Ceramic Society [Текст] : incorporating British Ceramic Abstracts. - Stoke-on-Trent : The British Ceramic Society, 1939 - . - Виходить щомісячно
1963р. т.62 N 7
Зміст:
Keeling, P. S. Infra-red Absorption Characteristics of Clay Materials / P. S. Keeling. - P.549-563. - Bibliography is at the end of the article : il.
Кл.слова: Infra-red spectrometer, kaolinite lattice, clay examination
Glenny, E. Design Considerations in the Engineering Applications of Brittle Materials / E. Glenny. - P.565-575. - Bibliography is at the end of the article : il.
Кл.слова: refractory metals, brittle behaviour, aircraft gas turbine application
Jackson, B. The Influence of Cr2O3 and Fe2O3 on the Wetting of Periclase Grains by liquid Silicate / B. Jackson [и др.]. - P.577-601. - Bibliography is at the end of the article : il.
Інші автори: Ford W. F., White J., The University of Sheffield
Кл.слова: periclase-silicate mixture, liquid-phase sintering, dihedral angle
Є примірники у відділах: всього 1 : аб.1 (1)
Вільні: аб.1 (1)

Знайти схожі

 1-20    21-40   41-60   61-64 
 

Наша адреса: 61000, Харків, вул. Кирпичова, 2
Науково-технічна бібліотека НТУ "ХПІ"
Контактний телефон: (057) 707-63-07
E-mail: library@khpi.edu.ua